Philips CD140 manual During the conference call 1 Press to put, How to find a handset

Page 19

4.5.3How to make a 3- way conference call

The conference call feature allows one external call to be shared with two handsets (in intercom).The three parties can share the conversation and no network subscription is required.

During an external call:

1Press

2Press the handset number that you want to talk with and the called handset rings if it is available

3Press on the called handset to establish the call connection with the calling

handset

4 Press and hold on the calling handset

•The conference call is initiated.

During the conference call: 1 Press to put the

external call on hold and go back to internal call

•The external call is put on hold automatically.

2Press and hold to establish the conference

call again

Note

Any handset hangs up during a conference call will leave the other handset still in connection with the external call.

4.6How to find a handset

You can locate the handset by pressing on the base station.

All the handsets registered to the base will produce the paging tone and you can stop

the paging by pressing			on
the handset or	on	the	base
again.

Using your phone

17

Image 19

Contents EN Digital Cordless Telephone CD140Page Table of contents Easily accessible Power requirementsUse one of the following disposal options National recovery & recycling systemDisposal instructions for batteries Electric, Magnetic and Electromagnetic Fields EMF Using GAP standard CompliancePage Batteries What’s in the boxTelephone handset Base station Line cordRedial/Flash key Overview of the phone Handset ACall Log keyPhonebook key Talk keyProgram key Alphanumeric keypad GStar keyHHash key Call Transfer / Intercom ConferenceBase station Key Display icons on the handsetConnect the base Station Getting startedSlide out the battery cover Install rechargeable BatteriesStation When the handset is fully Charged Phone Configure yourRegister your handset TipCall from the call log Make a call PrediallingCall is initiated Direct diallingEnd a call How to make a second call During a callHow to answer a Second call Call from the redial listHow to make an Internal call How to use IntercomDuring the conference call 1 Press to put How to find a handsetExternal call is put on hold automatically Number is saved Selected memory location How to adjust earpiece volume During a callCall in progress Mute/Unmute microphone During a call Is shown on the displayAll the phonebook entries are deleted How to access the phonebook Idle modeHow to edit the phonebook entry or Delete a number How to delete Entire phonebookSettings How to set the time How to access Call logHow to delete the entire call log How to access Redial listHow to select recall time How to set the ring volumeHow to set How to activate/deactivate Keypad lockHow to set the auto prefix How to select dial modeCurrent settings are displayed How to turn On/turn off the key toneYour phone is reset to its default settings How to program voice mailbox NumberHow to access your voice mail number How to restore to default settingsDefault settings Items Default values Poor audio quality Connection Handset does not switch onPhone does not work at all Communication is lost during a callHandset displays nothing, but only the is blinking AppearsSet-up Caller ID does not work properly Call Waiting call cannot be answeredHandset is unable to register Caller does not hear meNoise interference on your radio or television Phonebook entry cannot be storedPage

Related manuals

Manual 32 pages 62.51 Kb