Philips CD140 How to select dial mode, Current settings are displayed, How to set the auto prefix

Note

Number of available recall time options vary by different countries.

4Press to save the settings.

5.5.7How to select dial mode

This dial mode setting is country dependent . Pulse mode may not be available in some countries.

1Press

2Press

•The current settings are displayed.

3Press for pulse mode or for tone mode

4Press to save the settings.

5.5.8How to turn

on/turn off the key tone

1Press

2If the key beep is turned on

before, press to turn off the key tone

3	Press	to save the
	settings.

•The keypresses thereafter will not be heard.

22

5.5.9How to set the auto prefix

The maximum length of an auto prefix number is 10 digits. Once the number is set, it will be automatically inserted at the beginning of each number that will be dialled.

1Press ,

2Enter the detect digit where length of detect digit cannot be more than five digits

3Press

4Enter the auto prefix number

5 Press to save the settings

5.5.10 How to change the

master PIN

The master PIN is a 4-digit PIN for handset registration and reset of your phone. Default master PIN is 0000.This PIN is also used to protect the settings of your handset.Your handset will prompt you whenever the PIN is required.

Note

The default product PIN code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where

Use more of your phone