Philips CD140 manual Appears, Set-up Caller ID does not work properly, Sound Handset does not ring

Page 28

•Use the line cable provided

•Connect the line adaptor (when needed) to the line cord

The	is blinking.

•Move closer to the base station

•Check battery level

•Register the handset to the base station

The appears.

•Replace the batteries with new ones (use only rechargeable batteries)

Set-up

Caller ID does not work properly.

•Check with your local phone company that the CID service is subscribed to

•Let the phone ring at least once before answering

The Call Waiting call cannot be answered.

•Check with your local phone company and select the correct recall duration

The handset displays nothing, but only the is blinking.

•Try again by disconnecting and connecting the base station power supply and follow the procedure to register a handset (see Section 3.5)

•Remove and place back the handset batteries

Sound

Handset does not ring!

•Increase the volume

•Make sure that the adaptor and the phone cord are connected properly

•Move the handset closer to the base unit

•Make sure the handset ringer

is turned on ( is not displayed on the LCD)

26	Frequently asked questions

Image 28

Contents CD140 EN Digital Cordless TelephonePage Table of contents Power requirements Easily accessibleUse one of the following disposal options National recovery & recycling systemDisposal instructions for batteries Using GAP standard Compliance Electric, Magnetic and Electromagnetic Fields EMFPage What’s in the box Telephone handset Base stationLine cord BatteriesOverview of the phone Handset ACall Log key Phonebook keyTalk key Redial/Flash keyAlphanumeric keypad GStar key HHash keyCall Transfer / Intercom Conference Program keyDisplay icons on the handset Base station KeyGetting started Connect the base StationSlide out the battery cover Install rechargeable BatteriesStation When the handset is fully Charged Configure your PhoneTip Register your handsetMake a call Predialling Call is initiatedDirect dialling Call from the call logHow to make a second call During a call How to answer a Second callCall from the redial list End a callHow to use Intercom How to make an Internal callDuring the conference call 1 Press to put How to find a handsetExternal call is put on hold automatically How to adjust earpiece volume During a call Call in progress Mute/Unmute microphone During a callIs shown on the display Number is saved Selected memory locationHow to access the phonebook Idle mode How to edit the phonebook entry or Delete a numberHow to delete Entire phonebook All the phonebook entries are deletedHow to access Call log How to delete the entire call logHow to access Redial list Settings How to set the timeHow to set the ring volume How to setHow to activate/deactivate Keypad lock How to select recall timeHow to select dial mode Current settings are displayedHow to turn On/turn off the key tone How to set the auto prefixHow to program voice mailbox Number How to access your voice mail numberHow to restore to default settings Your phone is reset to its default settingsDefault settings Items Default values Connection Handset does not switch on Phone does not work at allCommunication is lost during a call Poor audio qualityAppears Set-up Caller ID does not work properlyCall Waiting call cannot be answered Handset displays nothing, but only the is blinkingCaller does not hear me Noise interference on your radio or televisionPhonebook entry cannot be stored Handset is unable to registerPage

Related manuals

Manual 32 pages 62.51 Kb