Uniden EXS 2010 manual Setting up the base unit, Choose the best location

Page 6

Setting up the base unit

Do the following steps.

Choose the best location

Connect the base unit

Choose the dialing mode

Choose the best location

Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important guidelines you should consider:

Avoid heat sources, such as radiators, air ducts, and sunlight

Avoid television sets and other electronic equipment

Choose a central location

Avoid noise sources such as a window by a street with heavy traffic

Avoid microwave ovens

Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock

Avoid personal computers

Avoid other cordless telephones

You should charge your handset for 15 - 20 hours before using the phone.

The location should be close to both a phone jack and continuous power outlet which is not switchable.

Keep the base and handset away from sources of electrical noise such as motors and fluorescent lighting.

Be sure there is sufficient space to raise the base antenna fully vertical.

The base can be placed on a desk, tabletop or mounted on a standard wall plate.

4

Image 6
Contents Features IntroductionControls and functions Contents Read this first Base unitHandset Checking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitPulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing systemDC in 9V jack Direct wall plate mounting Installing the handset battery pack Cleaning the charging contacts Battery use time per chargeWhen the battery charge becomes low Automatic digital code securityMaking a call Other OperationsHandset on the base Receiving a callRinger mute Handset off the baseAdjusting the ringer and earpiece volume Flash and Call WaitingRedialing a call When speaking on the handset When the phone is ringingMute Using page feature StandbyStoring phone numbers Making calls with memory dialing Memory dialing Chain dialingErasing a stored phone number Installing the beltclip Headset installationTo attach the beltclip To remove the beltclip When slightly dirty MaintenanceBattery replacement and handling When very dirtyTroubleshooting Symptom SuggestionAt Uniden, we’ll take care of you Index J, K, LV, W, X, Y, Z