Uniden EXS 2010 manual Maintenance, Battery replacement and handling, When slightly dirty

Page 23

Note on power sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery.

With normal usage, your battery should last about one year.

Please contact your place of purchase for a replacement battery.

Power Failure

During the period that the power is off, you will not be able to make or receive calls with the telephone.

RECYCLING NICKEL- CADMIUM BATTERIES

NICKEL-

CADMIUM

BATTERIES

MUST BE

DISPOSED OF

PROPERLY.

Nickel-cadmium cells are used in the battery pack. Please take your used nickel- cadmium battery packs to a store that recycles nickel- cadmium batteries.

Caution

•Use the specified battery pack.

•Do not remove the battery from the handset to charge it.

•Never throw the battery into a fire, disassemble it, or heat it.

•Do not remove or damage the battery casing.

Maintenance

When slightly dirty

Wipe with a soft, dry cloth.

When very dirty

Wipe with a soft cloth that has been dampened with diluted, neutral detergent. Dry with a dry cloth.

When the charging terminals become dirty

Wipe with a pencil eraser or other contact cleaner.

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Introduction FeaturesControls and functions Contents Handset Read this firstBase unit Checking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseDC in 9V jack Direct wall plate mounting Installing the handset battery pack Automatic digital code security Battery use time per chargeWhen the battery charge becomes low Cleaning the charging contactsOther Operations Making a callHandset off the base Receiving a callRinger mute Handset on the baseFlash and Call Waiting Adjusting the ringer and earpiece volumeRedialing a call Mute When speaking on the handsetWhen the phone is ringing Standby Using page featureStoring phone numbers Chain dialing Making calls with memory dialing Memory dialingErasing a stored phone number To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation When very dirty MaintenanceBattery replacement and handling When slightly dirtySymptom Suggestion TroubleshootingAt Uniden, we’ll take care of you V, W, X, Y, Z IndexJ, K, L
Top Page Image Contents