Uniden EXS 2010 Choose the dialing mode, If your dialing system is Set the switch to Tone, Pulse

Page 8

Use only the supplied AD-310 AC

adapter. Do not use any other AC Polarity of the plug adapter.

Connect the AC adapter to a continuous power supply.

Place the base unit close to the

AC outlet so that you can unplug the

AC adapter easily.

If your telephone outlet isn't modular,	Modular
contact your telephone company for
assistance.

Choose the dialing mode

PULSE TONE

Depending on your dialing system, set the PULSE-TONEswitch as follows:

If your dialing system is	Set the switch to
Tone	TONE
Pulse	PULSE

If you aren't sure of your dialing system

Make a trial call with the PULSE-TONEswitch set to TONE.

If the call connects, leave the switch as is; otherwise, set to PULSE.

6

Image 8

Contents Features IntroductionControls and functions Contents Handset Read this firstBase unit Checking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing systemDC in 9V jack Direct wall plate mounting Installing the handset battery pack Battery use time per charge When the battery charge becomes lowCleaning the charging contacts Automatic digital code securityMaking a call Other OperationsReceiving a call Ringer muteHandset on the base Handset off the baseAdjusting the ringer and earpiece volume Flash and Call WaitingRedialing a call Mute When speaking on the handsetWhen the phone is ringing Using page feature StandbyStoring phone numbers Making calls with memory dialing Memory dialing Chain dialingErasing a stored phone number To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Maintenance Battery replacement and handlingWhen slightly dirty When very dirtyTroubleshooting Symptom SuggestionAt Uniden, we’ll take care of you V, W, X, Y, Z IndexJ, K, L