Hitachi HPW-200EC manual Operating your Handheld PC with the Main batteries

Page 13

Operating your Handheld PC with the Main batteries

To insert the rechargeable Li-ion battery pack

1 Slide the Main Battery Cover lock switch to the FREE position, then slide the Main Battery Cover in the direction of the arrow.

2 Insert rechargeable Li-ion battery pack into the main battery compartment in the direction indicated as align Battery port.

3 Close the Main Battery Cover and slide the Main Battery Cover lock switch to the LOCK position.

Slide

Battery Cover

 

Battery Cover Lock Switch

Battery Cover Open

Li-ion battery pack

Picture to insert the Li-ion battery pack

Caution

 

If the very Low battery message is displayed, but you do not have immediate

 

access to connect AC adapter turn off your Handheld PC. The Backup battery

 

and the rest of main battery will maintain the memory. You must connect the AC

 

adapter within 3days, or all saved data may be erased. Don't remove the main

 

batteries when the Backup battery is very low. The battery level display on the

 

screen is indicated in case to use battery only.

 

If you continue to use handheld PC in case of very low battery message, your

 

handheld PC automatically turn off. In this case, it is strongly recommended to

 

connect AC adapter within 12 hours, or all saved data will be erased.

 

Note

 

After purchasing the Handheld PC system, in case the first time uses of

 

rechargeable Li-on battery pack, please charge rechargeable Li-ion battery pack

12

for at least 5 hours.

Image 13
Contents Handheld PC Hardware Users Guide Information to Users ICES-003 Statement Important Safety InstructionsPage Page Page Industry Canada Terminal Equipment Statement Page Page MIC WelcomePicture from the Bottom of the Handheld PC Running your Handheld PC Batteries and powerOperating your Handheld PC with the Main batteries To insert the rechargeable Li-ion battery packTo change the main battery Operating your Handheld PC with the AC adapter Charging rechargeable Li-ion battery packNotification LED Wireless infrared transfer Using the stylus PenTo use the stylus Pen Left Side View of Handheld PC Interface cableTo insert a PC card PC card slotTo remove a PC card To insert a CF card Using the CF card. also known as Compact Flash cardTo remove a CF card To use a modem RAM/ROM Slot To change ROM board Installation & Start-Up VGA Output Of Pocket PowerPoint ViewerGeneral Description Usage ESC Using the Voice Recorder Page To assign application to User1 and User2 To use Quick Launch KeyTo use and key Adjusting the display contrastTo increase display contrast To decrease display contrastTo perform a simple reset Resetting your Handheld PCTo perform a full reset Hardware Specifications PrecautionsPhysical Description and Features Weight Peripheral and Transfer Interface PowerCF Card Compatibility PC Card CompatibilityCompatibility Specification Error CorrectionStandard Data CompressionAT= x Write to Selected S-Register Re-execute CommandAT? Read Selected S-Register AnswerDn Dial En Command EchoDial Modifiers Hn Disconnect and hook control Fn Select Modulation Compatibility onlyModem Identification Mn Speaker ControlSet Pulse Dialing as a default On Return to On-Line Data ModeSn Access S-Register Set Tone Dial DefaultXn Extended Result Codes Control RING, no CARRIER, ERROR, no DIALTONE, Connect RateSummary of Supported Result Codes Fn Restore Default Configuration Zn ResetYn Long Space Disconnect Cn DCD Data Carrier Detect OptionQn Mode Selection Mn Mode SelectionGn Select Guard Tone Kn Flow ControlWn Store Current Configuration Display Current ConfigurationYn Selects a Default Reset Profile \Nn Selects Operating ModeRing 1.AT% Commands Enable/Disable Data CompressionConnect 1200 Connect 75 Connect 1200 BusyCompression None Compression V.42bisS1 Ring Counter S0 Number of Rings to Auto-AnswerS2 Escape Character S8 Pause Time For Dial DelayS3 Carriage Return Character S4 Line Feed CharacterS12 Escape Guard Time S11 Dtmf Tone DurationS36 Lapm Failure Control S37 Desired Line Connection SpeedS83 EC Negotiation timeout S38 Delay Before Forced Hang Up+Fcommand? Report Active Configuration +FCLASS=n Select Service Class+Fcommand=? Report Operating Capabilities Fax Modulation Table Value Modulation & Speed+FTM=n Transmit Data +FRS=n Receive Silence+FRM=n Receive Data +FTH=n Transmit Data with Hdlc FramingPage Page HDECLARATION of Conformity Spring,1998