Hitachi HPW-200EC manual Busy, Connect 75 Connect 1200

Page 47

NO DIALTONE (6)

For X2 and X4, the modem sends this result code if it has been instructed to wait for dial tone during dialing but none is received.

BUSY (7)

For X3 and X4, if busy tone detection is enforced, the modem sends this result code when attempting to originate a call if the busy signal is detected on the line.

CONNECT 600 (9)

CONNECT 2400 (10)

CONNECT 4800 (11)

CONNECT 9600 (12)

CONNECT 7200 (13)

CONNECT 12000 (14)

CONNECT 14400 (15)

CONNECT 19200 (16)

CONNECT 38400 (17)

CONNECT 57600 (18)

CONNECT 115200 (19)

CONNECT 16800 (59)

CONNECT 21600 (61)

CONNECT 24000 (62)

CONNECT 26400 (63)

CONNECT 28800 (64)

CONNECT 31200 (68)

CONNECT 33600 (70)

For X1, X2, X3, and X4, the modem sends this result code when the line speed is as indicated (in bps) and the modem has been instructed to report the line speed when connecting. These codes are also reported when the API-controlled virtual DTE speed is reported upon connection.

CONNECT 75 (22)

CONNECT 1200 (5)

For X1, X2, X3, and X4, the modem returns this result code upon establishing a V.23 originate or answer connection when the modem has been instructed to report the line speed upon connection.

CARRIER 300 (40)

CARRIER 1200 (44)

CARRIER 75 (45)

CARRIER 1200 (46)

CARRIER 2400 (47)

CARRIER 4800 (48)

CARRIER 7200 (49)

CARRIER 9600 (50)

CARRIER 12000 (51)

CARRIER 14400 (52)

CARRIER 16800 (53)

CARRIER 19200 (54)

CARRIER 21600 (55)

46

Image 47

Contents Handheld PC Hardware Users Guide Information to Users ICES-003 Statement Important Safety InstructionsPage Page Page Industry Canada Terminal Equipment Statement Page Page MIC WelcomePicture from the Bottom of the Handheld PC Running your Handheld PC Batteries and powerOperating your Handheld PC with the Main batteries To insert the rechargeable Li-ion battery packTo change the main battery Operating your Handheld PC with the AC adapter Charging rechargeable Li-ion battery packNotification LED To use the stylus Pen Using the stylus PenWireless infrared transfer Left Side View of Handheld PC Interface cableTo remove a PC card PC card slotTo insert a PC card To remove a CF card Using the CF card. also known as Compact Flash cardTo insert a CF card To use a modem RAM/ROM Slot To change ROM board General Description VGA Output Of Pocket PowerPoint ViewerInstallation & Start-Up Usage ESC Using the Voice Recorder Page To assign application to User1 and User2 To use Quick Launch KeyTo decrease display contrast Adjusting the display contrastTo use and key To increase display contrastTo perform a full reset Resetting your Handheld PCTo perform a simple reset Physical Description and Features PrecautionsHardware Specifications Weight Peripheral and Transfer Interface PowerCF Card Compatibility PC Card CompatibilityData Compression Error CorrectionCompatibility Specification StandardAnswer Re-execute CommandAT= x Write to Selected S-Register AT? Read Selected S-RegisterDial Modifiers En Command EchoDn Dial Mn Speaker Control Fn Select Modulation Compatibility onlyHn Disconnect and hook control Modem IdentificationSet Tone Dial Default On Return to On-Line Data ModeSet Pulse Dialing as a default Sn Access S-RegisterXn Extended Result Codes Control RING, no CARRIER, ERROR, no DIALTONE, Connect RateSummary of Supported Result Codes Cn DCD Data Carrier Detect Option Zn ResetFn Restore Default Configuration Yn Long Space DisconnectKn Flow Control Mn Mode SelectionQn Mode Selection Gn Select Guard Tone\Nn Selects Operating Mode Display Current ConfigurationWn Store Current Configuration Yn Selects a Default Reset ProfileConnect 1200 1.AT% Commands Enable/Disable Data CompressionRing Connect 75 Connect 1200 BusyCompression None Compression V.42bisS1 Ring Counter S0 Number of Rings to Auto-AnswerS4 Line Feed Character S8 Pause Time For Dial DelayS2 Escape Character S3 Carriage Return CharacterS37 Desired Line Connection Speed S11 Dtmf Tone DurationS12 Escape Guard Time S36 Lapm Failure ControlS83 EC Negotiation timeout S38 Delay Before Forced Hang UpFax Modulation Table Value Modulation & Speed +FCLASS=n Select Service Class+Fcommand? Report Active Configuration +Fcommand=? Report Operating Capabilities+FTH=n Transmit Data with Hdlc Framing +FRS=n Receive Silence+FTM=n Transmit Data +FRM=n Receive DataPage Page HDECLARATION of Conformity Spring,1998