Casio IT-500 manual General Guide

General Guide

LeftFront

1 2 3

12

4

		5
13	11	6
	10
	9	7
		8

RightBack

14 17 18 19

16

20

21

22

23

15

1	Indicator 1	This lamp indicates the charge status of the battery pack.
		Red: Charging
		Green: Charging complete
2	Indicator 2	Indicates the result of a barcode or other read operation.
		Red: Read error
		Green: Read successful
3	Receiver	Outputs audio.
4	LCD Panel/Touch	Shows text, operation indicators, etc. Also, operations can be
	Screen	performed and text can be input using the supplied stylus.
5	Power Key	Hold down for about one second to turn the power on or off.
6	Mic	Inputs audio.
7	Execute Key	Press to register an input value and advance to the next step.
8	Power supply	Used to supply power from the Cradles and Cradle-type Battery
	terminal	Charger.
9	Numeric Keys	Use these keys to input numbers and letters.
10	CLR Key	Press to clear all key inputs.
11	Fn Key	Press when switching to the input mode. In combination with the
		numeric keys, each setting is performed while it is also used when
		starting application which have been registered beforehand.
12	Trigger Key	Press to perform a barcode read operation. This is also pressed
		before performing full reset.

E-19