Casio IT-500 manual

5. Drive the upper screw and lower screw into the wall the rest of the way.

To remove the Bridge Satellite Cradle/Bridge Basic Cradle from the wall

1.Loosen the upper screw and lower screw.

2.Raise the Bridge Satellite Cradle/Bridge Basic Cradle and remove it from the screws.

Important!

•While the Bridge Satellite Cradle/Bridge Basic Cradle is mounted on a wall, be sure to check the wall screws periodically for looseness. Tighten them as required.

•Note use of the RS-232C cable is not supported by the wall-mounted configuration. Connect using a USB cable or daisy chain cable.

•Wall mounting may be difficult depending on the condition of the wall.

E-42