Installation Instructions

B.OUTSIDE TOP EXHAUST (Vertical Duct)

INSTALLATION OVERVIEW

 

B1.

Attach Mounting Plate to Wall

 

B2.

Prepare Top Cabinet

 

B3.

Adjust Blower

 

B4.

Check Damper Operation

 

B5.

Mount Microwave Oven

 

B6.

Adjust Exhaust Adaptor

 

B7.

Connect Ductwork

 

B1. ATTACH THE MOUNTING PLATE

To use toggle bolts:

TO THE WALL

Spacing for Toggles More

Than Wall Thickness

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Toggle Wings

 

 

 

 

 

 

Mounting

 

 

 

Toggle

 

Plate

 

 

 

Bolt

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wall

 

Bolt End

Attach the plate to the wall using toggle bolts. At least

3. Place the mounting plate against the wall and

one wood screw must be used to attach

insert the toggle wings into the holes in the wall to

the plate to a wall stud.

mount the plate.

1. Remove the toggle wings from the bolts.

NOTE: Before tightening toggle bolts and wood

2. Insert the bolts into the mounting plate through the

screw, make sure to coincide bottom line of the

Mounting plate with Horizontal line of “Rear wall

holes designated to go into drywall and reattach

Template” and then the Mounting plate is properly

the toggle wings to ¾" onto each bolt.

centered under the cabinet.

 

CAUTION: Be careful to avoid pinching fingers

 

between the back of the mounting plate and the wall.

 

4. Tighten all bolts. Pull the plate away from the wall

 

to help tighten the bolts.

14

Page 14
Image 14
Electrolux Over The Range Microwave Oven Installation Overview, B1. Attach the Mounting Plate, To the Wall