Installation Instructions
B2. USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET
You need to drill holes for the top support screws, a hole large enough for the power cord to fit through, and a cutout large enough for the exhaust adaptor.
•Read the instructions on the TOP CABINET TEMPLATE.
•Tape it underneath the top cabinet.
•Drill the holes, following the instructions on the
TOP CABINET TEMPLATE.
CAUTION: Wear safety goggles when drilling holes in the cabinet bottom.
B3. ADAPTING MICROWAVE BLOWER FOR OUTSIDE TOP EXHAUST
1. Remove and save | 2. Lift up the |
screw that holds | blower plate. |
blower plate to |
|
microwave. |
|
Blower Plate
Back of
Microwave
Screw
3. Carefully pull out the blower unit. The wires will extend far enough to allow you to adjust the blower unit.
CAUTION: Do not touch blade of blower to prevent cracking and breaking. Hold outer case when the blower is removed and
4. Roll the blower unit 90° so that fan blade openings are facing toward the top of the microwave.
BEFORE: Fan Blade
Openings Facing Forward
Roll
15
