Connecting the AC Adaptor for Cradle-type Battery Charger
Use the special AC adaptor for the Cradle-type Battery Charger to connect to a wall outlet.
1.After making sure that the Cradle-type Battery Charger power switch is turned off, plug the AC adaptor into the AC adaptor jack on the back of the charger.
Power switch (OFF)
2.Next, plug the AC adaptor into a power outlet.
3.Turn on the power. This causes the Cradle-type Battery Charger power indicator lamp to light in red.
Power contacts
POWER
Power Indicator Lamp
4.Making sure that their power contacts come into contact with each other, place the Handheld Terminal onto the Cradle-type Battery Charger. This causes the Cradle- type Battery Charger power indicator lamp to light in green.
When charging is initiated, indicator 1 on the IT-500 lights up in red. When charging has been completed, indicator 1 on the IT-500 changes color from red to green.
Important !
Take care to avoid allowing the Cradle-type Battery Charger power contacts to become connected to each other, which creates a short.
Shorting the power contacts can damage.