Casio IT-500 manual Bar Code Scanning Position, Never look directly into the laser light

Warning Label

LASER LIGHT

DO NOT STARE INTO BEAM

CLASS 2 LASER 1mW 650nm

IEC650825-1:1993+A1:1997

•This label is a warning and caution label for Class 2 laser products that comply with IEC60825-1:1993+A1:1997.

•Although Class 2 laser light is only emitted momentarily, never look directly into the beam light.

•CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

•The laser light emitted by this laser scanner has a maximum output of less than 1 mW and a wavelength of 650 nm.

Bar Code Scanning Position

Position the laser scanner close to the bar code when scanning small bar codes. Position the laser scanner at a distance from the bar code so that the bars enter the light when scanning large bar codes.

Margin	Margin
Good	Good	Good
Bad	Bad	Bad	Bad

Warning!

Never look directly into the laser light.

•This product scans using laser light. Never look directly into the laser light

or shine the laser light into the eyes. E-29