
Using your Pocket LOOX
Battery charging via a USB port
►Connect the USB cable to your Pocket LOOX.
►Connect the USB cable to the computer’s USB port.
The computer’s USB port must deliver no less than 500 mh of power. Because of the low charging current, the charging process will take longer than it does using the power adapter.
Optimizing battery life
The maximum operating time depends on the different applications used as some consume more energy than others.You can adjust system settings to help you to save energy when using your Pocket LOOX. These settings enable you to use the battery operating time optimally.
In the default setting the Pocket LOOX goes into the Suspend mode after three minutes when working without a power connection and no entries are made. You can switch on the Pocket LOOX again at any time by briefly pressing the Suspend/Resume button and then continue working where you left off.
Starting up your Pocket LOOX for the first time
2
1
►Press the Suspend/Resume button (1) to switch on the Pocket LOOX.
►Pull out the stylus (2) in the direction of the arrow.
Before using the Pocket LOOX, you must calibrate the screen (see chapter "Calibrating the screen", Page 28).
9 |