Page 20
4.1.2Set the Time Menu
To set the time, highlight the MENU and press SELECT. Highlight SET TIME and press SELECT (see Figure 24). Use the UP or DOWN button to set the values. Press SELECT to continue.
MAIN MENU
HELP
PROGRAM
SET TEMP
SET TIME
PDA OPTIONS
SYSTEM SETUP
Figure 24. Set Time Menu
4.1.3Set the Temperature Menu
Pool/Spa Combination - Highlight MENU and press SELECT. Highlight SET TEMP and press SELECT (see Figure 25). Use the UP or DOWN button to highlight either POOL or SPA and press SELECT. Use the UP or DOWN button to increase or decrease the temperature and press SELECT. Use the BACK button to return to the main screen.
MAIN MENU | SET TEMP | ||
HELP |
| POOL HEAT | 80°F |
PROGRAM |
| SPA HEAT | 104°F |
SET TEMP |
|
|
|
SET TIME |
|
|
|
PDA OPTIONS |
| Highlight an |
|
SYSTEM SETUP |
| ||
|
| item and press | |
|
| SELECT |
|
SET TEMP | SET TEMP | ||
POOL HEAT | 80°F | POOL HEAT | 85°F |
SPA HEAT | 104°F | SPA HEAT | 104°F |
Highlight an |
| Highlight an |
|
item and press | item and press | ||
SELECT |
| SELECT |
|
Figure 25. Set Temperature Menu - Pool/Spa Combination
Pool/Spa Only - Highlight MENU and press SELECT. Highlight SET TEMP and press SELECT (see Figure 26). The message TEMP1 must be higher than TEMP2 is displayed. Highlight TEMP1 and press SELECT. Use the UP or DOWN button to increase or decrease the temperature and press SELECT. Highlight TEMP2 and press SELECT. Use the UP or DOWN button to increase or decrease the temperature and press SELECT. Use the BACK button to return to the main screen.
MAIN MENU | SET TEMP | ||
HELP |
| TEMP1 | 80°F |
PROGRAM |
| TEMP2 | 60°F |
SET TEMP |
|
|
|
SET TIME |
|
|
|
PDA OPTIONS |
| Highlight an |
|
SYSTEM SETUP |
| ||
|
| item and press | |
|
| SELECT |
|
SET TEMP |
| SET TEMP |
|
TEMP1 | 80°F | TEMP1 | 85°F |
TEMP2 | 60°F | TEMP2 | 60°F |
Highlight an |
| Highlight an |
|
item and press |
| item and press |
|
SELECT |
| SELECT |
|
Figure 26. Set Temperature Menu - Pool/Spa Only
4.1.4Label Auxiliary Functions Menu
Highlight MENU and press SELECT. Highlight SYSTEM SETUP and press SELECT (see Figure 27). Highlight LABEL AUX and press SELECT. Highlight the AUX you want to label and press SELECT. Highlight GENERAL, LIGHT, WATERFALL or CUSTOM LABEL and press SELECT. Choose a name within these categories by using the UP or DOWN button. Press SELECT when you find the correct label. Choose CUSTOM to type in your own labels.
NOTE The Auxiliary labels AIR BLOWER and FILL LINE have an automatic 30 minute runtime. If DIP switch 1,2 or 3 are on, auxiliaries 1, 2 and 3 are labeled CLEANER, LOW SPEED and SPILLOVER respectively and cannot be