Page 8
2.3Basic Plumbing
2.3.1Plumbing for Pool and Spa Combination
The following plumbing diagrams illustrate simplified versions of standard plumbing setups for a pool and spa that share the same filter pump, filter, and heater. The intake and return Jandy Valve Actuators (JVAs) turn simultaneously so when the Spa mode is selected on the AquaLink RS PDA, water circulation switches between pool and spa (consult the Jandy Valve Actuator Installation and Operation Manual to ensure that the JVAs are synchronized and rotate properly). Please consult the Jandy Valve Plumbing Manual for further examples of pool/spa plumbing.
Please note that if you have a pool only or a spa only, the diagram does not apply.
NOTE When the filter system is shared (a Pool/Spa Combo), the spa water must be able to overflow into the pool.
From Solar | To Solar |
|
Heat Pump |
|
|
Check |
|
|
Valve |
|
|
Heater |
| Filter |
|
| Pump |
Spa | Filter |
|
|
| |
|
| |
| Check | Pool Drain |
| Valve |
|
Pool Return | Spa Return | Spa Drain |
|
| |
| Skimmers | Skimmers |