
INSTALLING THE BATTERY
You need one 
Note: You must also connect the supplied AC adapter to use the mod-
ule.
Follow these steps to install the battery.
1.If the phone lines are already connected, unplug them from the module.
2. Use a coin to turn the lock on the bottom of the module to OPEN, then slide off the battery compartment cover.
3.Insert the fresh battery into the compartment, aligning the + on the battery with the + on the case.
 WALL
 WALL 
PHONE
9VDC  !
!
LOCK
OPEN/
LOCK
| LES | REMPLACER | |
| LE | ||
| CHANGINGDEBRANCHER | DE | |
| DISCONNECT | BEFORE | ATTENTION:AVANT | 
| OPEN | CAUTION:LINE | |
10