Radio Shack SYSTEM 440 owner manual Module displays Line cords going into the module

Page 28

43-974.fm Page 28 Monday, August 16, 1999 4:27 PM

Problem

Solution

 

 

Module displays

• The line cords going into the module

NO DATA SENT

are swapped.

 

• Your answering machine might be

 

blocking Caller ID information:

 

— Set the machine to answer after

 

2 rings.

 

— Use the alternative answering

 

machine set-up. See “Connect-

 

ing to an Answering Machine” on

 

Page 14.

 

• Wait at least 2 rings before answering

 

the incoming call.

 

• If you subscribe to Call Forwarding

 

service, it might be activated. Turn off

 

your Call Forwarding.

 

(Continued on next page)

 

 

28

 

Image 28
Contents System Fm Page 2 Monday, August 16, 1999 427 PM Features Fm Page 4 Monday, August 16, 1999 427 PM Important Information FCC Information Fm Page 7 Monday, August 16, 1999 427 PM Contents Connecting the AC Adapter PreparationInstalling the Battery Open LockFm Page 11 Monday, August 16, 1999 427 PM Adjusting the Display Contrast Delete ReviewConnecting to a Phone Connecting to AN Answering Machine Check Power Hang UP Phone & Check ALL Cords Swap Jacks Checking the CONNECTIONS/SELECTING the LanguageAdding Additional Modules Mounting the Module Hooks Holes Mounting Bracket Operation Receiving and Storing CallsReviewing Calls Line Error Displayed Call InformationAnonymous Call END of ListLong Distance # NEW CallsNo Calls Message WaitingDisplay Light Deleting Calls Deleting a Single CallTroubleshooting DataCheck Power Hang UP Phone Power FailureCheck ALL Cords Module displays Line cords going into the module Module displays If the problem continues for more Care and Maintenance Lightning We Service What We Sell