Radio Shack SYSTEM 440 owner manual Connecting to a Phone

Page 13

43-974.fm Page 13 Monday, August 16, 1999 4:27 PM

CONNECTING TO A PHONE

1.	Disconnect the		tele-	Supplied
	phone line cord from			Line
	the phone.			Cord
	the phone.
2.	Plug the line cord into
	the	module’s	WALL
	jack.
3.	Plug one end of the
	supplied line cord into
	the	module’s PHONE

jack.

4. Plug the other end into the phone’s jack.

PHONE

WALL

Note: If this is not your only Caller ID product, see “Adding Additional Modules” on Page 16.

13

Image 13

Contents System Fm Page 2 Monday, August 16, 1999 427 PM Features Fm Page 4 Monday, August 16, 1999 427 PM Important Information FCC Information Fm Page 7 Monday, August 16, 1999 427 PM Contents Preparation Connecting the AC AdapterOpen Lock Installing the BatteryFm Page 11 Monday, August 16, 1999 427 PM Delete Review Adjusting the Display ContrastConnecting to a Phone Connecting to AN Answering Machine Checking the CONNECTIONS/SELECTING the Language Check Power Hang UP Phone & Check ALL Cords Swap JacksAdding Additional Modules Mounting the Module Hooks Holes Mounting Bracket Receiving and Storing Calls OperationReviewing Calls Displayed Call Information Line ErrorAnonymous Call END of List# NEW Calls Long DistanceNo Calls Message WaitingDisplay Light Deleting a Single Call Deleting CallsData TroubleshootingCheck Power Hang UP Phone Power FailureCheck ALL Cords Module displays Line cords going into the module Module displays If the problem continues for more Care and Maintenance Lightning We Service What We Sell