Radio Shack SYSTEM 440 owner manual Connecting to AN Answering Machine

Page 14

43-974.fm Page 14 Monday, August 16, 1999 4:27 PM

CONNECTING TO AN ANSWERING MACHINE

	1. Disconnect			the	line
	cord		that	connects
	your			answering
	machine			to	your	WALL
	phone		from		the	WALL
	phone		from		the	PHONE
	answering			machine’s		PHONE
	answering			machine’s
	jack.	Then		plug	the
	cord into the module’s Supplied
	PHONE jack.				Line Cord
	PHONE jack.

2.Plug one end of the supplied line cord into the module’s WALL jack.

3.Plug the cord’s other end into the answering machine’s jack.

4.Set your answering machine to answer after 2 or more rings.

Some answering ma- chines block Caller ID in-

formation from the module. If you have prob- lems receiving Caller ID information, try setting up your equipment this way:

PHONE WALL

Supplied Line Cord

14

Image 14

Contents System Fm Page 2 Monday, August 16, 1999 427 PM Features Fm Page 4 Monday, August 16, 1999 427 PM Important Information FCC Information Fm Page 7 Monday, August 16, 1999 427 PM Contents Connecting the AC Adapter PreparationInstalling the Battery Open LockFm Page 11 Monday, August 16, 1999 427 PM Adjusting the Display Contrast Delete ReviewConnecting to a Phone Connecting to AN Answering Machine Check Power Hang UP Phone & Check ALL Cords Swap Jacks Checking the CONNECTIONS/SELECTING the LanguageAdding Additional Modules Mounting the Module Hooks Holes Mounting Bracket Operation Receiving and Storing CallsReviewing Calls Anonymous Call Line ErrorDisplayed Call Information END of ListNo Calls Long Distance# NEW Calls Message WaitingDisplay Light Deleting Calls Deleting a Single CallTroubleshooting DataCheck Power Check ALL Cords Power FailureHang UP Phone Module displays Line cords going into the module Module displays If the problem continues for more Care and Maintenance Lightning We Service What We Sell