TG251x_2xE(e).book Page 36 Monday, January 25, 2010 3:09 PM
Useful Information
Problem | Cause/solution |
The unit does not work. | L Make sure the batteries are installed correctly |
| (page 11). |
| L Fully charge the batteries (page 11). |
| L Check the connections (page 11). |
| L Unplug the base unit’s AC adaptor to reset the |
| unit and turn off the handset. Reconnect the |
| adaptor, turn on the handset and try again. |
| L The handset has not been registered to the |
| base unit. Register the handset (page 40). |
I cannot hear a dial tone. | L Make sure that you are using the supplied |
| telephone line cord. Your old telephone line |
| cord may have a different wiring configuration. |
| L The base unit’s AC adaptor or telephone line |
| cord is not connected. Check the connections. |
| L Disconnect the base unit from the telephone |
| line and connect the line to a known working |
| telephone. If the working telephone operates |
| properly, contact our service personnel to |
| have the unit repaired. If the working |
| telephone does not operate properly, contact |
| your service provider/telephone company. |
I cannot use the intercom*1 or | L These features are shared between the |
phonebook copy*2 feature. | handsets. Although the handset displays |
| “Intercom”, “Copy All”, or “Copy”, these |
| features are not available for this model. |
*1 |
|
*2 |
|
|
|
Programmable settings |
|
|
|
Problem | Cause/solution |
The display is in a language I | L Change the display language (page 14). |
cannot read. |
|
I cannot activate the eco mode. | L You cannot set eco mode when you set the |
| repeater mode “On”. If required, set the |
| repeater mode to “Off” (page 22). |