Panasonic KX-TG2523E, KX-TG2524E, KX-TG2521E, KX-TG2522E Important safety instructions

Page 8

TG251x_2xE(e).book Page 8 Monday, January 25, 2010 3:09 PM

Important Information

Battery

LWe recommend using the batteries noted on page 4. USE ONLY rechargeable Ni-

MH batteries AAA (R03) size.

LDo not mix old and new batteries.

LDo not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.

LExercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns.

LCharge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual.

LOnly use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode.

Important safety instructions

When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1.Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool.

2.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

3.Do not use the telephone to report a gas leak in the vicinity of the leak.

4.Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS

For best performance

Base unit location/avoiding noise

The base unit and other compatible Panasonic units use radio waves to communicate with each other.

LFor maximum coverage and noise-free communications, place your base unit:

at a convenient, high, and central location with no obstructions between the handset and base unit in an indoor environment.

away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones.

facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.)

LCoverage and voice quality depends on the local environmental conditions.

LIf the reception for a base unit location is not satisfactory, move the base unit to another location for better reception.

Environment

LKeep the product away from electrical noise generating devices, such as fluorescent lamps and motors.

LThe product should be kept free from excessive smoke, dust, high temperature, and vibration.

LThe product should not be exposed to direct sunlight.

LDo not place heavy objects on top of the product.

LWhen you leave the product unused for a long period of time, unplug the product from the power outlet.

LThe product should be kept away from heat sources such as radiators, cookers, etc. It should not be placed in rooms where the temperature is less than 0 °C or greater than 40 °C. Damp basements should also be avoided.

LThe maximum calling distance may be shortened when the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc.

8Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333

Image 8
Contents Before initial use, see Getting Started on Caller ID Service Voice Mail ServiceIntroduction Important InformationAccessory information Supplied accessoriesModel composition Series Model No Base unit Handset QuantityHelpline Tel. No. U.K 844 3898 R.O.I Additional/replacement accessoriesAccessory item Model number Sales and support information Customer Care CentreDeclaration of Conformity General informationFor your future reference For your safety Important safety instructions Other information Operating conditions Setting up Battery installationBattery charge ConnectionsOperation Operating time During a power failureBattery level Icon Controls DisplayHandset Base unitTurning the power on/off Initial settingsHandset Setup Display Setup Select Language Display languageDate and time One touch eco modeHandset Setup Set Date & Time Making calls Answering callsUseful features during a call HoldMute Recall/flashHandset phonebook Adding entriesFinding and calling a phonebook entry Editing entriesCopying all entries Copying phonebook entriesCopying an entry Programmable settings Programming by scrolling through the display menusRegister H.set Handset SetupRinger Setup Ringer Volume *3 Setting the repeater mode Base Unit Setup Repeater ModeSpecial programming Increasing the range of the base unitUsing Caller ID service Caller ID featuresCaller list Viewing the caller list and calling backErasing caller information Storing caller information to the phonebookEdit and Call Erase or Erase AllAnswering system Turning the answering system on/offMemory capacity including your greeting message Call screeningUsing a pre-recorded greeting message Greeting messageListening to messages Recording your greeting messageRemote operation Operating the answering systemCalling back Caller ID subscribers only Erasing all messagesRemote access code Using the answering system remotelyRemote commands Voice guidanceAnswering system settings For voice mail service subscribersTurning on the answering system remotely Number of rings before the unit answers a callCaller’s recording time Recording TimeVoice mail service Intercom Transferring calls Conference calls Handset locatorMaking an intercom call Answering an intercom callCharacter entry modes When the unit displays the character entry screenCharacter entry Extended 1 character table N Extended 2 character table OError messages TroubleshootingProblem Cause/solution Programmable settings Problem Cause/solutionMaking/answering calls, intercom Problem Cause/solution Base Unit SetupBattery recharge Problem Cause/solution Caller ID Problem Cause/solution Unit does not Registering a handset to the base unit Handset Liquid damage Problem Cause/solutionHandset Setup ij/OK Register H.set ij/OK Base Unit Setup ij/OK Base Unit PIN ij/OK Wall mountingChanging the base unit PIN Personal Identification Number Base unit ChargerConditions of guarantee Panasonic Business Systems U.KIndex Sales Department Copyright