Grizzly G0651, G0652 owner manual Operations, Operation Safety Basic Controls

SECTION 4: OPERATIONS

Operation Safety Basic Controls

Damage to your eyes, lungs, and ears could result from using this machine without proper protective gear. Always wear safety glasses, a respirator, and hearing protection when operating this machine.

Loose hair and clothing can get caught in machin- ery and cause serious per- sonal injury. Keep loose clothing and long hair

away from machinery.

Keep the blade guard in the down position at all times. Failure to do this could result in serious personal injury or death.

NOTICE

If you have never used this type of machine or equipment before, We strongly rec- ommend that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.

-30-

This section covers the basic controls used during routine operations.

ON Button: Starts motor.

Stop Paddle/Off Button: Stops motor when pushed in.

Safety Pin & Chain: Disable the saw and pre- vent accidental startup by inserting the safety pin through the holes in the ON button, and insert the end of the chain into the pin, as shown in Figure 34.

Safety

Pin

ON

Switch

Stop

Paddle

Safety Pin

Figure 34. Switch disabled.

G0651/G0652 10" Extreme Series Table Saws