-18- g0651/g0652 10" extreme series table saws
Extension Table
Box contents: (figure 7) Qty
A. extension table ..........................................1
B. lower shelf ................................................ 1
c. shelf end plate ...........................................1
D. support legs ..............................................2
E. lower shelf Brackets .................................2
fasteners (and where used, not shown) : Qty
Cap screws m8-1.25 x 25
(rear rail/Cabinet/ext. table) ....................8
Flat head screws m8-1.25 x 25
(Front rail/Cabinet/ext. table) ...................8
Flat Washers 8mm
(Front rail/ext. table/rear rail) ..............14
hex nuts m8-1.25
(Front rail/ext. table/rear rail) ................8
lock Washers 8mm
(Front rail/ext. table/rear rail) ..............10
hex Bolts m8-1.25 x 12
(Cabinet/ext. table) ....................................2
Flat Washers 8mm (Cabinet/ext. table) ....2
Flat head screws m8-1.25 x 25
(table/ext. table) .......................................2
mounting plates (table/ext. table) ............2
hex Bolts m6-1 x 12
(Brackets/Cabinet/legs) .............................2
hex nuts m6-1
(Brackets/Cabinet) ...................................... 2
Feet 38"-16 x 2 (legs) .................................2
hex nuts 38-16 (legs) ................................2
phillip head screws m6-1 x 12
(ext. table/legs/shelf Brackets) ..............14
Flat Washers 6mm
(ext table/legs/shelf Brackets) ...............16
hex Bolts w/Washers m8-1.25 x 12
(tube/ Front rail) ........................................9
figure 7. extension table components.
a
B
C
d
e
if any nonproprietar y par ts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Outfeed Table
Box contents: (figure 8) Qty
A. outfeed table .............................................1
B. lower shelf ................................................ 1
c. shelf end plate ...........................................1
D. support legs ..............................................2
E. lower shelf Brackets .................................2
fasteners (and where used, not shown) : Qty
hex Bolts m8-1.25 x 20 w/Washer
(rear rail/outfeed table) ........................... 2
hex nuts m8-1.25
(rear rail/outfeed table) ........................... 2
Flat Washers 8mm
(rear rail/outfeed table) ........................... 2
hex Bolts m6-1 x 12
(Brackets/Cabinet) ...................................... 2
hex nuts m6-1 (Bracket/end plate) ...........2
Flat Washers 6mm
(outfeed table/legs/shelf Brackets) ........ 16
phillips head screws m6-1 x 12
(outfeed table/legs/shelf Brackets) ........ 14
Feet 38-16 x 2 (legs) ..................................2
hex nuts 38-16 (legs) ................................2
figure 8. outfeed table components.
a
B
C
d
e
SuffOcATION hAzARD!
Immediately discard all plas-
tic bags and packing materi-
als to eliminate choking/suf-
focation hazards for children
and animals.