Panasonic KX-TCD410NL operating instructions Other Options, Setting the Direct Call Number

TCD410NL_E.book Page 22 Thursday, March 20, 2003 5:55 PM

Handset Settings

Before programming, please follow steps 1 to 3.

1 2 3

Press MENU.	Search/Select	Search/Select
	"SETTING HS".	"CALL OPT".

Setting the Direct Call Number

After a direct call number has been set and on, you can dial the direct call number only by pressing TALK. Incoming calls are accepted.

4		5 Phone Number	6
	Search/Select	Enter the direct	Press OK 3 times.
		call number. (max. 24 digits)
	"DIRECT NO".
Setting the Direct Call On/Off

4	5
Search/Select	Search/Select
"SET DIRECT".	"ON" or "OFF". *1

•To exit the operation, press any time.

*1 If "ON" is selected, is displayed.

: Other Options

Changing Handset PIN

The factory preset is 0000. Once you have programmed the handset PIN, you cannot confirm it. We recommend you write down the handset PIN. If you forget it, please consult your nearest Panasonic Service Centre. 070-3314500

1	2	3	4
Press MENU.	Search/Select	Search/Select	Search/Select
	"SETTING HS". "OTHER OPT".		"HSPIN CHANGE".
5 Current 4-digit Handset PIN		6 New 4-digit Handset PIN*1

7 New 4-digit Handset PIN again to verify

•To exit the operation, press any time.

*1 The factory preset is 0000.

22