![](/images/new-backgrounds/1295506/29550663x1.webp)
TCD410NL_E.book Page 26 Thursday, March 20, 2003 5:55 PM
Base Unit Settings
Before programming, please follow steps 1 to 2.
1 | 2 | "INPUT CODE" |
Press MENU. Search/Select
"SETTING BS".
Automatic Route Selection
Automatic Route Selection is a feature which selects the least expensive carrier (network) service available, when making long distance calls.
When area code(s) have been related to carrier codes, you will need only dial the area code, the lower costing carrier (network) will automatically be dialled.
Please contact your telephone company regarding the carrier telephone charges.
Storing the Carrier Code(s)
Firstly you must subscribe to a second carrier (network) service. Then store the code as follows:
2nd Carrier Code |
|
|
| |
3 9 4 Base | 5 1 6 1 On Enter the carrier code. 7 |
|
|
|
|
|
| ||
|
|
| ||
|
|
| ||
Unit PIN*1 | (max. 7 digits) | Press OK. | ||
|
|
Storing the Area Code(s)/Country Code
Store the area code(s) for which the chosen carrier (network) service charge rates are lower than the original carrier (network) service. Up to 25 area codes can be stored. If you do not store any area codes, all phone numbers will be dialled with the second carrier code.
| 2 6 Area Code 7 |
|
3 9 4 Base Unit 5 | 8 | |
PIN*1 | (max. 5 digits) | Press OK.*2 Press OK. |
•To exit the operation, press any time.
*1 The factory preset is 0000.
*2 If you need more area code storing, repeat the steps from 6.
26