Panasonic KX-TCD410NL Before Requesting Help, Problem Possible cause Solution

Page 41

TCD410NL_E.book Page 35 Thursday, March 20, 2003 5:55 PM

Before Requesting Help

If you experience any problems with the normal use of your apparatus, you should unplug it from the telephone outlet and connect a known working telephone in its place. If the known working telephone still has problems, then please contact the customer service department of your Network provider.

If it operates correctly, then the problem is likely to be a fault in your apparatus.

In this case, contact your supplier for advice. Your Network provider may charge you if they attend a service call that is not due to apparatus supplied by them.

Turn the power OFF then ON (Handset) / Disconnect then connect the AC adaptor (Base unit)

Problem

Possible cause

Solution

NO LCD display in handset.

• Handset not turned on.

• Turn on power (p.9).

 

 

 

Handset will not turn on.

• Batteries not inserted.

• Insert the 2 rechargeable

 

 

batteries supplied (p.4).

 

• Batteries not charged.

• Place handset in base and

 

 

connect AC adaptor to base

 

 

and AC outlet (full charge

 

 

period 7 hrs).

 

 

 

Batteries charge icon not

• Dirty charge contact.

• Clean charge / battery

counting up.

 

contact and retry charge.

 

• Base not powered up.

• Connect AC adaptor to

 

 

base unit and AC outlet.

icon flashes.

•Handset not registered to base.

•Handset out of range of base.

•No power into base unit.

•Register handset to base.

•Move handset closer to base.

•Connect AC adaptor to base unit and AC outlet.

Useful

Handset busy tone heard

• Handset out of range of

• Move handset closer to

when

is pressed.

base.

base.

 

 

• Another handset in use.

• Wait for the other user to

 

 

 

complete call.

 

 

 

No dial tone.

• Telephone line not

• Insert telephone cord to

 

 

connected.

network.

 

 

 

• Turn power OFF then ON.

 

 

 

Cannot dial out.

• Call BAR set.

• Turn feature off.

•Particular dialled number is • Remove number from call

restricted.

restricted list.

• Key lock mode ON.

• Turn key lock OFF.

Information

35

Page 40 Page 42
Image 41
Page 40 Page 42
Contents
Battery Installation Setting UpModel No. KX-TCD410NL ConnectionHandset Location of ControlsBase Unit Handset DisplayExample Your Guide to the DisplayCharacter Table 1st Menu 2nd Menu 3rd Menu Set-up Menu for HandsetFunction Action OperationsSymbols Used in This Operating Instructions Model No. KX-TCD410NL ContentsBefore Initial Use Accessories includedImportant Information Hook Battery Life Battery ChargeFully charged Display iconPlease use only Panasonic P03PNi-MH or P03HNi-Cd batteries Selecting the Battery TypeReplacing the Batteries Base unit Location of ControlsHandset Wall Mounting Power On/Off Using the TelephoneSetting the Clock/Date Making a CallRedialling Making CallsEditing the Dialled Number in the Redial List Clearing One/All Dialled Items in the Redial ListCaller ID Display Caller ID ServiceCaller ID Editing the Received Number in the Caller List Caller ID ListCalling Back Answering Calls Receiver VolumeAuto Talk Temporary Bell OffStoring a Caller Information PhonebookPhone Number NameNumber Editing a Caller InformationClearing a Caller Information Dialling with the PhonebookSave TEL NO.*2 Phone Number *1 NameRegistering a Phone Number as a Hot Key Hot KeyDialling with Hot Key Clearing the Hot Key RegistrationTime Alarm Handset SettingsSetting Time Alarm On/Off Before programming, please follow steps 1 toRinger Option Setting the Ringer VolumeDisplay Option Selecting the Standby Mode DisplayTone Option Call Option Selecting the Talk Mode DisplayCall BAR On/Off DigitOther Options Setting the Direct Call NumberSetting the Direct Call On/Off Key Lock Recall FeatureDialling Pause for PBX line/long distance service users Digit Base Handset Number Unit PIN*1 Base Unit SettingsSelect Flash Timing Cancelling Call Restricted Number 4-digit Base Unit PIN *14 Base Unit 5 2 6 1 PIN *1 Pause TimingStoring the Area Codes/Country Code Automatic Route SelectionStoring the Carrier Codes To Turn the International Code 00 Delete Mode ON/OFF International Carrier ServicesDigit Base Unit Automatic Route Selection On/Off Digit Base UnitHandset Initial Settings Function Initial SettingsReset Handset Digit Base Unit PIN*1 Reset Base Unit SettingsBase Unit Initial Settings Function Handset Registration to a Base Unit Multi-unit User OperationDigit Handset PIN *1 Cancelling a Base UnitCancelling a Handset Setting the Selected Handsets Mode Handset Numbers *2 Ringer Mode Selection Setting the All Handsets ModeSetting the Selected then All Handsets Mode Number of Rings *3Base Unit Selection Transferring a Call to Another Handset/Conference Call IntercomIntercom between Handsets Before Requesting Help Problem Possible cause SolutionTCD410NLE.book Page 36 Thursday, March 20, 2003 555 PM Connections SpecificationsTechnical Information Garantiebewijs PIN IndexCustomer Care Helpline Tel. No For your future referenceVerkoopafdeling PQQX13533ZA D0403RY0PQQW13138ZA D0603-0 Original Revision
Related manuals
Manual 47 pages 4.46 Kb