Panasonic KX-TCD410NL operating instructions Intercom between Handsets

TCD410NL_E.book Page 34 Thursday, March 20, 2003 5:55 PM

Intercom

Intercom between Handsets

You can use your handsets as a 2-way intercom.

For example, when Handset 1 calls Handset 2. To hang up, press .

	<Handset 1>
1	INT	( on the display) 2	2
	Press INTERCOM.		Press desired
			Handset Number.

<Handset 2> 3

Press TALK.*1

•Intercom calls can be conducted within the radio cell of the current base unit, but not with units in neighbouring radio areas.

Transferring a Call to Another Handset/Conference Call

Intercom can be used during a call to transfer an external call between handsets that are registered to the same base unit. For example, when handset 1 transfers a call to Handset 2. To hang up, press .

<Handset 1>	1		(	on the display) 2	2	4 3*3
(During a call)		INT
		Press INTERCOM.			Press desired
					Handset Number.*2
				<Handset 2>		3
						Press TALK.*1

*1 You can also press any dialling button, INTERCOM, t or x.

*2 If you press after pressing desired handset number, a call can be transferred to another handset without speaking to another handset.

If the transferred call is not answered within 30 seconds, Handset 1 will ring again.

*3 When Handset 2 answers a call transferred, press to complete a call transfer or

press dialling button 3 to establish the conference call.

34