![](/images/new-backgrounds/1257642/257642155x1.webp)
Base Unit Settings
Call Options and Other Options of Base Unit Settings must be operated with the cordless handset.
Call Options ![](/images/new-backgrounds/1257642/257642155xi3.webp)
To exit the operation, press at any time.
1 | Press JOYSTICK | 2 Select “ | Setting 3 | Enter |
| (or move). | Base”. |
| Unit PIN. |
|
|
|
| (Factory Preset 0000) |
4 | Select “Call Option”. |
|
|
|
|
|
|
| Go to step 5. |
Selecting the Dialling Mode (Tone/Pulse)
You can change the dialling mode to tone or pulse depending upon your network service. If you have a touch tone service, select “Tone”. If you have rotary or pulse service, select “Pulse”.
Follow steps 1 to 4 of Call Options on the previous page, then:
5 Select “Dial Mode”. | 6 Select “Tone ” or “Pulse”. | ||
|
|
|
|
•The factory preset is “Tone”.
Selecting the Recall Time
You can select the recall time, 80 ms (milliseconds), 400 ms or 700 ms depending on your PBX requirements.
Follow steps 1 to 4 of Call Options on the previous page, then:
5 Select “Recall”. | 6 | Select “Type 1” (700 ms), “Type 2” | |||
|
|
| (400 ms) or “Type 3” (80 ms). | ||
|
|
|
|
|
|
|
|
|
|
|
|
• The factory preset is “Type 2” (400 ms).
78