Using the Handset Phonebook
Entering Characters
You can enter characters and digits using the dialing keys.
You can select one of 3 character modes by pressing the Right Soft Key while entering a name. The function icon above the soft key displays the current character mode.
See “Character Mode Table” (page 43) for available characters.
A, a
B, b
C, c
2
To change the character mode while editing a name in the Phonebook, press the Right Soft Key. | ||
Alphabet | Numeric | Extended |
Example: To enter “Anne” in Alphabet Mode.
•To switch between uppercase and lowercase, press 
.
•To enter a character located on the same dialing key as the previous character, move the cursor by moving the Joystick 
, then enter the desired character.
•If you enter a different character by mistake, move the Joystick 
to highlight the character, press 
to delete it, then enter the correct character.
•To clear an entire line, press 
for more than 1 second.
•To move the cursor, move the Joystick 
.
42 | Document Version |