L When the handset has been registered successfully, w will stop flashing. If keytones are turned on (page 19), a confirmation tone will be heard.
Cancelling a handset
A maximum of 6 handsets can be registered to the base unit. A handset can cancel its own registration (or the registration of another handset) that is stored in the base unit. This will allow the base unit to “forget” the handset.
1{j/OK} i“Base Unit Setup” i
{>}
2Enter “335”.
3“Cancel Handset” i {>} L The numbers of all handsets
registered to the base unit are displayed.
4Select the handset(s) you want to cancel, by pressing the desired handset number. i {j/OK}
L The selected handset number(s) will flash.
L To cancel a selected handset number, press the number again. The number will stop flashing.
5“Yes” i {>} i {ih}
Increasing the range of the base unit
You can increase the range of the base unit by using a DECT repeater. Please use only the Panasonic DECT repeater noted on page 5. Consult your Panasonic dealer for details.
Important:
L Before registering the repeater to this base unit, you must turn the repeater mode on.
Setting the repeater mode
1{j/OK} i“Base Unit Setup” i
{>}
2“Other Options” i {>}
3“Repeater Mode” i {>}
4“On” or “Off” i {>} i {ih}
Note:
L After turning repeater mode on or off, w will flash on the handset momentarily. This is normal. The handset can be used once w stops flashing.
Intercom between handsets
Intercom calls can be made between handsets in the same radio cell. Example: When handset 1 calls handset 2
1Handset 1:
{INT} i Press {2} (desired handset number).
2Handset 2:
Press {C} / {s} to answer.
3When finished talking, press {ih}.
Transferring calls between handsets, conference calls
Example: When handset 1 transfers a call to handset 2
Transferring calls between handsets
Outside calls can be transferred between 2 people in the same radio cell.
1Handset 1:
38