Intercom Features
For KX-TG5439 users
Call the desired unit by selecting the extension number, shown in the upper right of each handset’s display. The base unit’s extension number is 0.
L To confirm the handset’s extension number ([1] or [2]), place the handset on the base unit or charger.
L The base unit will display the paging or paged handset number (H1 or H2).
From the handset to the base unit
1 Handset:
Press {INTERCOM}, then press {0}.
L You can also select the base unit by pressing {V} or {^} then pressing
{>}.
L The base unit will ring for 1 minute. L To stop paging, press {OFF}.
2 Base unit:
Press either {LOCATOR/INTERCOM 1} or {LOCATOR/INTERCOM 2} to answer the page.
3 Handset:
When finished talking, press {OFF} or place the handset on the charger.
Note:
L During an intercom call, the handset user can switch to the speaker by pressing {s}. To switch back to the receiver, press {C}.
L To adjust the base unit’s speaker volume, press {>} or {<} repeatedly. 8 levels (high to low) are available.
From the base unit to a handset
1 Base unit:
Press {LOCATOR/INTERCOM 1} or {LOCATOR/INTERCOM 2}.
L The handset will beep for 1 minute.
L To stop paging, press either {LOCATOR/INTERCOM 1} or {LOCATOR/INTERCOM 2}.
2 Handset:
Press {C}, {s}, or {INTERCOM} to answer the page.
3 Base unit:
When the paged party answers, speak into the MIC.
4 Base unit:
When finished talking, press either {LOCATOR/INTERCOM 1} or {LOCATOR/INTERCOM 2}.
Note:
L You can locate a misplaced handset by paging it. (Handset locator)
From one handset to the other handset
Example: When handset 1 calls handset 2.
1 Handset 1:
Press {INTERCOM}, then press the other handset number {2}.
L You can also select the handset by pressing {V} or {^} then pressing
{>}.
L The paged handset will beep for 1 minute.
L To stop paging, press {OFF}.
2 Handset 2:
Press {C}, {s}, or {INTERCOM} to answer.
3 When finished talking, press {OFF} or place the handset on the base unit or charger.
For assistance, please call | 31 |