Panasonic KX-TG8070HK operating instructions Making calls, Useful features during a call

Page 12

C Making/Answering Calls

Making calls

1Lift the handset and dial the phone number. L To correct a digit, press {DEL}.

2{C}

3When finished talking, press {i} or place the handset on the base unit.

Speakerphone

1During a conversation, press {s} to turn on the speakerphone.

L Speak alternately with the caller.

2When finished talking, press {i}.

Note:

LFor best performance, use the speakerphone in a quiet environment.

L To switch back to the receiver, press {C}. L Speakerphone cannot be used when the

headset is connected.

Adjusting the receiver or speaker volume

Press {^} or {V} while on a call.

Making a call using the redial list

The last 10 phone numbers dialled are stored in the redial list (each 24 digits max.).

1{V/R}

2{^}/{V}: Select the desired number.

3{C}

Editing/erasing/storing

1{V/R}

2{^}/{V}: Select the desired number. i

{MENU}

3Proceed with the desired operation.

Editing a number before calling it:

{^}/{V}: Edit and Calli{OK} i

Press {<} or {>} to move the cursor. i Edit the number. i{C}

Erasing numbers:

{^}/{V}: Eraseor Erase Alli

{OK} i{YES} i{i}

Storing a number into the handset phonebook:

{^}/{V}: Add Phonebooki{OK} i

Enter a name (15 characters max.; page 22). i{OK} i{i}

Note:

L When editing:

To erase a number, place the cursor to the right of where you want to erase the number, then press {DEL}.

To insert a number, place the cursor where you want to insert the number, then press the appropriate dial key.

Pause (for PBX/long distance service users)

A pause is sometimes required when making calls using a PBX or long distance service.

Example: If you have to dial {9} before dialling outside numbers manually, you will probably need to pause after dialling {9} until you hear a dial tone.

1Press {9} to reproduce a dial tone for outside calls.

2Press {0} for about 2 seconds to enter a pause.

3Dial the phone number. i{C}

Note:

LA 3 second pause is inserted each time {0} is pressed for about 2 seconds. Repeat as needed to create longer pauses.

Useful features during a call

Mute

While mute is turned on, you will be able to hear the other party, but the other party will not be able to hear you.

To mute your voice, press {</T}. L ois displayed.

LTo return to the conversation, press {</T} again.

12

Image 12
Contents Model No. KX-TG8070HK Table of Contents Introduction Accessory information Supplied accessoriesAccessory items Quantity Additional/replacement accessoriesBattery caution Important informationGeneral EnvironmentControls Displays Connections Location of base unitBattery installation and replacement Battery chargeScreen saver mode Setting up the unit before useIf the handset is not on the base unit While chargingDialling mode tone/pulse Date and timeUseful features during a call Making a call using the redial listPause for PBX/long distance service users Making callsAnswering calls Handset phonebook Handset settings Special instructions for display setup Display Setup iOK Handset Name iOKHandset names Base unit settings Ringtone Call Options Dial ModePBX Access No Recall/FlashUsing Caller ID service Caller listOperating additional units Registering a handset to a base unitIntercom between handsets Transferring calls between handsets, conference callsHandset Using the belt clip Attaching the belt clip Removing the belt clipError messages Character entryBusy No Base FoundTroubleshooting Telephone Problem Cause & solutionProblem Cause & solution For DSL users Specifications Index HK-2/2 PQQX15902ZA CC1007DA0Hotline Tel. No Sole Agent for Hong Kong & Macau Copyright