Panasonic KX-TS108W Dialing Mode, To select Pulse, press To select Tone, press

Page 11

Press (PROGRAM).

Press (MUTE).

Press (3).

≥The current setting is displayed.

“

Dialing Mode

You can select the dialing mode by programming. If you have touch tone service, set to “Tone”. If rotary or pulse service is used, set to “Pulse”. Your phone comes from the factory set to “Tone”.

Make sure that a call is not put on hold.

1

2

3

4 To select “Pulse”, press (2).

OR

To select “Tone”, press (1).

5 Press (PROGRAM). ≥A long beep sounds.

≥The unit will return to the standby mode.

Preparation

For assistance, please call: 1-800-211-PANA(7262)

11

Image 11

Contents Operating Instructions Name and address of dealer Before Initial UseAttach your purchase receipt here For your future reference Serial No Date of purchaseAccessories included Contents Preparation Useful Information One-Touch Auto Dial Buttons p Location of ControlsSelector p Display After connection, lift the handset to check for a dial tone SettingsInstalling the Batteries Connecting the Handset/Telephone Line CordConnecting a Communication Device Press 5. Press Program to store the settingProgramming Summary Press MuteTo select Pulse, press To select Tone, press Dialing ModeYou can select AM/PM or military time by programming Time AdjustmentPress 1 to Ringer VolumeLCD Contrast PressWall mounting adaptor, Wall MountingTuck the telephone line cord inside To redial the last number dialed Using the speakerphoneMaking Calls Press Hold To increase, press Volume . To decrease, press VolumeTo put a call on hold To release the holdTalk into the MIC microphone Answering CallsPress a memory station number 0 to Speed DialerStoring Phone Numbers Enter a phone number, up to 22 digitsTo erase a stored number Dialing a Stored NumberPress one of the one-touch auto dial buttons One-Touch DialerTo store in an Upper memory location Memory location, press the one-touch To store in a Lower memory locationIf the phone number is in an Upper Lift the handset or press SP-PHONE/HEADSET From an Upper memory locationFrom a Lower memory location Memory cardTemporary Tone Dialing Special FeaturesFor Call Waiting Service Users For Rotary or Pulse Service UsersPress Mute while talking How to Use the Pause ButtonFor Analog PBX Line/Long Distance Service Users Muting Your ConversationPress a dialing button 1 to Flash ButtonSelecting the ﬂash time Number Enter a new PIN code using a 4-digitPIN Code Press Mute Enter the current PIN code. Ex is enteredEnter the PIN code p To cancel the dial lockDial Lock To set the dial lockEnter the PIN code p . Ex. Your PIN code is Call RestrictionTo set the call restriction Optional Headset To cancel the call restrictionConnecting an Optional Headset to the Unit Press SP-PHONE/HEADSETto make or answer a call While using the headset, press Volume orMaking/Answering Calls Battery Precautions Battery ReplacementProblemRemedy TroubleshootingOnly Important Safety Instructions Useful Information Ringer Equivalence No. REN FCC and Other InformationUseful Information Index When you ship the product For product servicePQQX13160YA F1201-2045D