Panasonic KX-TS108W operating instructions Battery Replacement, Battery Precautions

Page 31

Battery Replacement

If “ ” ﬂashes, the battery power is low. Install new batteries. Replace the batteries within 1 minute to keep the programmed settings. But the programmed time setting will be cleared.

-	+			1	Disconnect the telephone line cord
	+				from the unit.
+		-
-+
2				2
					Press down in the direction of the
					arrow and remove the cover.
			1	3	Replace the batteries with new ones
				3	using correct polarity (i, j), and

close the cover.

4 Connect the telephone line cord to the unit.

≥If the time is shown as “12-00” and “ ” ﬂashes after replacing the batteries, readjust the time.

Battery Precautions:

The batteries should be used correctly, otherwise the unit may be damaged by battery leakage.

—Do not mix different types of batteries.

—Do not charge, short-circuit, disassemble, heat or dispose of in ﬁre. —Remove all the batteries when replacing.

Note:

—If you do not install the batteries or if the battery power is low, the time will be shown as “12-00” and “ ” will ﬂash. Readjust the time.

—Replace all the batteries once a half year in use of Alkaline batteries, or

misoperation may occur. (When you use Manganese batteries, replace all of

them once in three months.)Useful —Do not use nickel-cadmium batteries.

Information

For assistance, please call: 1-800-211-PANA(7262)

31

Image 31

Contents Operating Instructions Name and address of dealer Before Initial UseAttach your purchase receipt here For your future reference Serial No Date of purchaseAccessories included Contents Preparation Useful Information Selector p Location of ControlsOne-Touch Auto Dial Buttons p Display After connection, lift the handset to check for a dial tone SettingsInstalling the Batteries Connecting the Handset/Telephone Line CordConnecting a Communication Device Press 5. Press Program to store the settingProgramming Summary Press MuteTo select Pulse, press To select Tone, press Dialing ModeYou can select AM/PM or military time by programming Time AdjustmentPress 1 to Ringer VolumeLCD Contrast PressTuck the telephone line cord inside Wall MountingWall mounting adaptor, Making Calls Using the speakerphoneTo redial the last number dialed Press Hold To increase, press Volume . To decrease, press VolumeTo put a call on hold To release the holdTalk into the MIC microphone Answering CallsPress a memory station number 0 to Speed DialerStoring Phone Numbers Enter a phone number, up to 22 digitsTo erase a stored number Dialing a Stored NumberTo store in an Upper memory location One-Touch DialerPress one of the one-touch auto dial buttons If the phone number is in an Upper To store in a Lower memory locationMemory location, press the one-touch Lift the handset or press SP-PHONE/HEADSET From an Upper memory locationFrom a Lower memory location Memory cardTemporary Tone Dialing Special FeaturesFor Call Waiting Service Users For Rotary or Pulse Service UsersPress Mute while talking How to Use the Pause ButtonFor Analog PBX Line/Long Distance Service Users Muting Your ConversationSelecting the ﬂash time Flash ButtonPress a dialing button 1 to Number Enter a new PIN code using a 4-digitPIN Code Press Mute Enter the current PIN code. Ex is enteredEnter the PIN code p To cancel the dial lockDial Lock To set the dial lockTo set the call restriction Call RestrictionEnter the PIN code p . Ex. Your PIN code is Connecting an Optional Headset to the Unit To cancel the call restrictionOptional Headset Making/Answering Calls While using the headset, press Volume orPress SP-PHONE/HEADSETto make or answer a call Battery Precautions Battery ReplacementProblemRemedy TroubleshootingOnly Important Safety Instructions Useful Information Ringer Equivalence No. REN FCC and Other InformationUseful Information Index When you ship the product For product servicePQQX13160YA F1201-2045D