Panasonic KX-TS108W Dial Lock, To set the dial lock, To cancel the dial lock

Page 27

“

Dial Lock

You can prevent others from making a call to any number except the one pre-programmed in the memory of the EMERGENCY button. Once you locked the dialing buttons, even emergency numbers cannot be dialed. Only incoming calls are accepted until the dial lock is canceled.

Before using this feature, we recommend

storing an emergency number in the

memory of the EMERGENCY button (p. 20). (EMERGENCY) Even if the dialing buttons are locked, the

number stored in the button can be dialed.

≥If you choose not to program emergency numbers, but plan to use the dial lock, any number programmed into the EMERGENCY button can be accessed.

To set the dial lock

1	Press (DIAL\LOCK).
	≥“		” ﬂashes on the display.

2	Enter the PIN code (p. 26).
3	Press (PROGRAM).
	≥“		” is displayed.

≥A long beep sounds.

≥If a wrong PIN code is entered, 3 beeps

will sound. Enter a correct PIN code and press (PROGRAM).

≥The unit will return to the standby mode.

You can use the following features while the dialing buttons are locked.

≥Dialing a number you programmed into the memory of the EMERGENCY button (p. 22)

≥Adjusting the handset and speakerphone volumes (p. 16)

≥Muting the conversation (p. 24)

≥Answering the second call by pressing (FLASH) (p. 23)

Advanced Operation

To cancel the dial lock

Follow steps 1 through 3 above again.

≥“ ” will disappear, and the unit will return to the standby mode.

For assistance, please call: 1-800-211-PANA(7262)

27

Image 27

Contents Operating Instructions Name and address of dealer Before Initial UseAttach your purchase receipt here For your future reference Serial No Date of purchaseAccessories included Contents Preparation Useful Information Location of Controls Selector pOne-Touch Auto Dial Buttons p Display After connection, lift the handset to check for a dial tone SettingsInstalling the Batteries Connecting the Handset/Telephone Line CordConnecting a Communication Device Press 5. Press Program to store the settingProgramming Summary Press MuteTo select Pulse, press To select Tone, press Dialing ModeYou can select AM/PM or military time by programming Time AdjustmentPress 1 to Ringer VolumeLCD Contrast PressWall Mounting Tuck the telephone line cord insideWall mounting adaptor, Using the speakerphone Making CallsTo redial the last number dialed Press Hold To increase, press Volume . To decrease, press VolumeTo put a call on hold To release the holdTalk into the MIC microphone Answering CallsPress a memory station number 0 to Speed DialerStoring Phone Numbers Enter a phone number, up to 22 digitsTo erase a stored number Dialing a Stored NumberOne-Touch Dialer To store in an Upper memory locationPress one of the one-touch auto dial buttons To store in a Lower memory location If the phone number is in an UpperMemory location, press the one-touch Lift the handset or press SP-PHONE/HEADSET From an Upper memory locationFrom a Lower memory location Memory cardTemporary Tone Dialing Special FeaturesFor Call Waiting Service Users For Rotary or Pulse Service UsersPress Mute while talking How to Use the Pause ButtonFor Analog PBX Line/Long Distance Service Users Muting Your ConversationFlash Button Selecting the ﬂash timePress a dialing button 1 to Number Enter a new PIN code using a 4-digitPIN Code Press Mute Enter the current PIN code. Ex is enteredEnter the PIN code p To cancel the dial lockDial Lock To set the dial lockCall Restriction To set the call restrictionEnter the PIN code p . Ex. Your PIN code is To cancel the call restriction Connecting an Optional Headset to the UnitOptional Headset While using the headset, press Volume or Making/Answering CallsPress SP-PHONE/HEADSETto make or answer a call Battery Precautions Battery ReplacementProblemRemedy TroubleshootingOnly Important Safety Instructions Useful Information Ringer Equivalence No. REN FCC and Other InformationUseful Information Index When you ship the product For product servicePQQX13160YA F1201-2045D