Panasonic KX-TS108W operating instructions Useful Information

Page 35

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

CAUTION:

To reduce the risk of fire or injury to persons, read and follow these instructions.

11. Use only the battery(ies) specified.

12. Do not dispose of the battery(ies) in a fire. It (they) may explode. Check with local waste management codes for special disposal instructions.

13. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

14. Exercise care in handling the battery(ies) in order not to short the battery(ies) to conductive materials such as rings, bracelets, and keys. The battery(ies) and/or conductor may overheat and cause burns.

15. Do not recharge the battery(ies) provided with or identified for use with this product. The battery(ies) may leak corrosive electrolyte or explode.

16. Do not attempt to rejuvenate the battery(ies) provided with or identified for use with this product by heating. Sudden release of battery electrolyte may occur causing burns or irritation to the eyes or skin.

17. Replace all batteries at the same time. Mixing fresh and discharged batteries could increase internal cell pressure and rupture the discharged batteries. (Applies to products employing more than one separately replaceable primary battery.)

18. When installing batteries observe the proper polarity or direction. Incorrect installation can cause charging, and may result in leakage or explosion. (Applies to products employing more than one separately replaceable primary battery.)

19. Remove the battery(ies) from this product if the product will not be used for a long period of time (several months or more). During this time the battery(ies) could leak in the product.

10.Discard the “dead” battery(ies) as soon as possible. The “dead” battery(ies) may leak in the product.

11.Do not store this product, or the battery(ies) provided with or identified for use with this product, in high temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from condensation during storage and defrosting. Batteries should be stabilized at room temperature prior to use after cold storage.

Useful Information

For assistance, please call: 1-800-211-PANA(7262)

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Operating Instructions Name and address of dealer Before Initial UseAttach your purchase receipt here For your future reference Serial No Date of purchaseAccessories included Contents Preparation Useful Information One-Touch Auto Dial Buttons p Location of ControlsSelector p Display After connection, lift the handset to check for a dial tone SettingsInstalling the Batteries Connecting the Handset/Telephone Line CordConnecting a Communication Device Press 5. Press Program to store the settingProgramming Summary Press MuteTo select Pulse, press To select Tone, press Dialing ModeYou can select AM/PM or military time by programming Time AdjustmentPress 1 to Ringer VolumeLCD Contrast PressWall mounting adaptor, Wall MountingTuck the telephone line cord inside To redial the last number dialed Using the speakerphoneMaking Calls Press Hold To increase, press Volume . To decrease, press VolumeTo put a call on hold To release the holdTalk into the MIC microphone Answering CallsPress a memory station number 0 to Speed DialerStoring Phone Numbers Enter a phone number, up to 22 digitsTo erase a stored number Dialing a Stored NumberPress one of the one-touch auto dial buttons One-Touch DialerTo store in an Upper memory location Memory location, press the one-touch To store in a Lower memory locationIf the phone number is in an Upper Lift the handset or press SP-PHONE/HEADSET From an Upper memory locationFrom a Lower memory location Memory cardTemporary Tone Dialing Special FeaturesFor Call Waiting Service Users For Rotary or Pulse Service UsersPress Mute while talking How to Use the Pause ButtonFor Analog PBX Line/Long Distance Service Users Muting Your ConversationPress a dialing button 1 to Flash ButtonSelecting the flash time Number Enter a new PIN code using a 4-digitPIN Code Press Mute Enter the current PIN code. Ex is enteredEnter the PIN code p To cancel the dial lockDial Lock To set the dial lockEnter the PIN code p . Ex. Your PIN code is Call RestrictionTo set the call restriction Optional Headset To cancel the call restrictionConnecting an Optional Headset to the Unit Press SP-PHONE/HEADSETto make or answer a call While using the headset, press Volume orMaking/Answering Calls Battery Precautions Battery ReplacementProblemRemedy TroubleshootingOnly Important Safety Instructions Useful Information Ringer Equivalence No. REN FCC and Other InformationUseful Information Index When you ship the product For product servicePQQX13160YA F1201-2045D
Top Page Image Contents