Panasonic KX-TS108W operating instructions Troubleshooting, ProblemRemedy

Page 32

Troubleshooting

ProblemRemedy

The unit does not work.

≥Check the settings (p. 8–14).

≥Remove the batteries and reinstall them to reset the unit.

The unit does not ring.

≥The RINGER selector is set to OFF. Set to HIGH or LOW (p. 13).

You cannot dial.≥Check that the dialing mode selection is correct (p. 11).

≥Dial lock mode is set. To cancel the mode, see page 27.

≥The dialed number is restricted. To cancel, see page 29.

The other party suddenly	≥(MUTE) may have been pressed during
cannot hear your voice	the conversation. If “		” is displayed,

during a conversation.	press (MUTE).

You cannot program items ≥Programming is not possible when a

such as the dialing mode. call is put on hold.

≥Do not pause for over 60 seconds while programming.

You cannot store a phone number in memory.

≥Programming is not possible when a call is put on hold.

≥Check that the batteries are installed in the unit and that the battery power is not low.

≥Do not enter a phone number more than 22 digits long.

≥When using the Dial Lock (p. 27) or Call Restriction feature (p. 28), you cannot store a phone number in the EMERGENCY button.

While programming, the unit starts to ring and stops the program.

≥To answer the call, lift the handset or press (SP-PHONE/HEADSET). Start again from the beginning after hanging up.

You cannot redial by	≥If the last number dialed was more
pressing (REDIAL).	than 32 digits long, the number will not
	be redialed correctly.

32

Image 32

Contents Operating Instructions Before Initial Use Attach your purchase receipt here For your future referenceSerial No Date of purchase Name and address of dealerAccessories included Contents Preparation Useful Information One-Touch Auto Dial Buttons p Location of ControlsSelector p Display Settings Installing the BatteriesConnecting the Handset/Telephone Line Cord After connection, lift the handset to check for a dial toneConnecting a Communication Device Press Program to store the setting Programming SummaryPress Mute Press 5.Dialing Mode To select Pulse, press To select Tone, pressTime Adjustment You can select AM/PM or military time by programmingRinger Volume LCD ContrastPress Press 1 toWall mounting adaptor, Wall MountingTuck the telephone line cord inside To redial the last number dialed Using the speakerphoneMaking Calls To increase, press Volume . To decrease, press Volume To put a call on holdTo release the hold Press HoldAnswering Calls Talk into the MIC microphoneSpeed Dialer Storing Phone NumbersEnter a phone number, up to 22 digits Press a memory station number 0 toDialing a Stored Number To erase a stored numberPress one of the one-touch auto dial buttons One-Touch DialerTo store in an Upper memory location Memory location, press the one-touch To store in a Lower memory locationIf the phone number is in an Upper From an Upper memory location From a Lower memory locationMemory card Lift the handset or press SP-PHONE/HEADSETSpecial Features For Call Waiting Service UsersFor Rotary or Pulse Service Users Temporary Tone DialingHow to Use the Pause Button For Analog PBX Line/Long Distance Service UsersMuting Your Conversation Press Mute while talkingPress a dialing button 1 to Flash ButtonSelecting the ﬂash time Enter a new PIN code using a 4-digit PIN CodePress Mute Enter the current PIN code. Ex is entered NumberTo cancel the dial lock Dial LockTo set the dial lock Enter the PIN code pEnter the PIN code p . Ex. Your PIN code is Call RestrictionTo set the call restriction Optional Headset To cancel the call restrictionConnecting an Optional Headset to the Unit Press SP-PHONE/HEADSETto make or answer a call While using the headset, press Volume orMaking/Answering Calls Battery Replacement Battery PrecautionsTroubleshooting ProblemRemedyOnly Important Safety Instructions Useful Information FCC and Other Information Ringer Equivalence No. RENUseful Information Index For product service When you ship the productPQQX13160YA F1201-2045D