Panasonic KX-TS108W operating instructions Call Restriction, To set the call restriction

Page 28

“Special Features

Call Restriction

You can prevent the unit from dialing phone numbers beginning with speciﬁed digit(s) (1 digit or 2 digits). Phone numbers with the restricted leading digits cannot be dialed out.

To set the call restriction

Make sure that a call is not put on hold.

1

2

3

Press (PROGRAM).

Press (MUTE).

Press (1).

≥If you use “1111” as a PIN code (factory set), the display on the right will be shown. There is no need to enter a PIN code. Go to step 6.

≥After the PIN code is changed, “– – – –” will be displayed.

4

5

Enter the PIN code (p. 26). (Ex. Your PIN code is “1234”.)

Press (PROGRAM).

≥If a wrong PIN code is entered, 3 beeps

will sound. Enter a correct PIN code and press (PROGRAM).

≥The current setting is displayed. (Ex. “67” is entered as the restricted digits.)

6

7

Enter the number(s) (1 digit or 2 digits) you want to restrict ((0) to (9)). (Ex. “12” is entered as the restricted digits.)

≥If you enter a wrong number, enter a correct number.

≥To change restricted digits from 2 digits to 1 digit, press ($) for 2 digits to change to “– –” and enter 1 digit.

Press (PROGRAM).

≥A long beep sounds.

≥The unit will return to the standby mode.

≥If your unit is connected to a PBX, this function may not operate. Contact your PBX supplier for more information.

When dialing a phone number with the restricted leading digit(s), the dialed number will ﬂash on the display, but not dialed out.

28

Image 28

Contents Operating Instructions Before Initial Use Attach your purchase receipt here For your future referenceSerial No Date of purchase Name and address of dealerAccessories included Contents Preparation Useful Information Selector p Location of ControlsOne-Touch Auto Dial Buttons p Display Settings Installing the BatteriesConnecting the Handset/Telephone Line Cord After connection, lift the handset to check for a dial toneConnecting a Communication Device Press Program to store the setting Programming SummaryPress Mute Press 5.Dialing Mode To select Pulse, press To select Tone, pressTime Adjustment You can select AM/PM or military time by programmingRinger Volume LCD ContrastPress Press 1 toTuck the telephone line cord inside Wall MountingWall mounting adaptor, Making Calls Using the speakerphoneTo redial the last number dialed To increase, press Volume . To decrease, press Volume To put a call on holdTo release the hold Press HoldAnswering Calls Talk into the MIC microphoneSpeed Dialer Storing Phone NumbersEnter a phone number, up to 22 digits Press a memory station number 0 toDialing a Stored Number To erase a stored numberTo store in an Upper memory location One-Touch DialerPress one of the one-touch auto dial buttons If the phone number is in an Upper To store in a Lower memory locationMemory location, press the one-touch From an Upper memory location From a Lower memory locationMemory card Lift the handset or press SP-PHONE/HEADSETSpecial Features For Call Waiting Service UsersFor Rotary or Pulse Service Users Temporary Tone DialingHow to Use the Pause Button For Analog PBX Line/Long Distance Service UsersMuting Your Conversation Press Mute while talkingSelecting the ﬂash time Flash ButtonPress a dialing button 1 to Enter a new PIN code using a 4-digit PIN CodePress Mute Enter the current PIN code. Ex is entered NumberTo cancel the dial lock Dial LockTo set the dial lock Enter the PIN code pTo set the call restriction Call RestrictionEnter the PIN code p . Ex. Your PIN code is Connecting an Optional Headset to the Unit To cancel the call restrictionOptional Headset Making/Answering Calls While using the headset, press Volume orPress SP-PHONE/HEADSETto make or answer a call Battery Replacement Battery PrecautionsTroubleshooting ProblemRemedyOnly Important Safety Instructions Useful Information FCC and Other Information Ringer Equivalence No. RENUseful Information Index For product service When you ship the productPQQX13160YA F1201-2045D