Making/Answering Calls Using the Base Unit
Temporary tone dialing for landline calls (for rotary/pulse service users)
You can temporarily switch the dialing mode to tone when you need to access
Press {*} (TONE) before entering access numbers which require tone dialing.
Call share
This feature allows you to join an existing outside call.
Important:
L When the privacy mode is on, you cannot join the conversation. Turn it off (page 23).
To select the line that is being used for the call:
–for a cellular line press {CELL 1} or
{CELL 2}.
–for the landline press
Note:
L A maximum of 3 parties (including 1 outside party) can join a conversation using 2 extensions.
Transferring a cellular call between the base unit and a cellular phone
Transferring a cellular call from the base unit to a cellular phone
During a cellular call, press and hold {CELL 1} or {CELL 2} until the SP- PHONE indicator goes out.
L The cellular call is transferred to the cellular phone.
Transferring a cellular call from a cellular phone to the base unit
During a conversation using a cellular phone, press {CELL 1} or {CELL 2}. L The cellular call is transferred to the
base unit.
Using the other line during a conversation
You can handle a cellular call and a landline call at the same time. When another call is being received during a conversation, the interrupt tone sounds (page 35). You can answer the 2nd call while holding the 1st call.
Making/answering a cellular call during a conversation on the landline
1Press {HOLD} during a landline call.
2To make a 2nd call:
Press {CELL 1} or {CELL 2}. i
Dial the phone number.*1 iPress {CELL 1} or {CELL 2} again or wait
for 5 seconds.
*1 Dial the next digit within 5 seconds, otherwise the unit starts dialing.
To answer a 2nd call:
Press {CELL 1} or {CELL 2}.
L To hold the 2nd call, press {HOLD}.
3To hang up the 2nd call and return to the 1st call (landline call), press
For assistance, please visit http://www.panasonic.com/help | 27 |