Panasonic KX-TG6582T operating instructions Registering a headset

Page 48

Using Bluetooth Devices

Using a Bluetooth wireless headset (optional) for landline calls

By registering a Bluetooth headset to the base unit, you can have a hands-free conversation wirelessly for landline calls.

Important:

L 1 headset can be registered to the base unit. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.

L For best performance, we recommend using a Bluetooth headset within 1 m (3.3 feet) of the base unit. A headset can communicate with the base unit within a range of approximately 10 m (33 feet).

Registering a headset

Important:

L Make sure that the Bluetooth headset is not connected to any other Bluetooth device.

1Your headset:

Set your headset to registration mode.

L Refer to the headset operating instructions.

2Handset:

{MENU} i{#}{6}{2}{1}

3Enter your headset PIN.

L Typically, default PIN is “0000”. Refer to the headset operating instructions.

4Press {OK}, then wait until a long beep sounds.

5{OFF}

L When the HEADSET indicator on the base unit lights green, you are ready to use the headset.

Connecting/disconnecting a headset

If you cannot connect the headset and base unit using the headset, you can connect using the unit.

To use your headset with another Bluetooth device such as a cellular phone, you may need to disconnect it from the base unit.

Important:

L Make sure that the headset is turned on.

Base unit

To connect: {HEADSET}

To disconnect:

Press and hold {HEADSET} until a long beep sounds.

Handset

1To connect/disconnect:

{MENU} i{#}{6}{2}{2} L A long beep sounds.

2{OFF}

Deregistering a headset

You can cancel a registration of the headset that is stored to the base unit. See “Deregistering Bluetooth devices”, page 19.

Operating a Bluetooth wireless headset using the landline

Important:

L For headset operations, refer to your headset operating instructions.

48For assistance, please visit http://www.panasonic.com/help

Image 48

Contents Before initial use, see Getting Started on Making/Answering Calls Using the Handset Making/Answering Calls Using the Base UnitCaller ID Service Using Bluetooth DevicesAccessory information Supplied accessoriesAccessory item/Order number Quantity KX-TG6582 KX-TG6583 Model compositionAdditional/replacement accessories Expanding your phone systemFor your safety Important safety instructions Other information Setting up Battery installationBattery charge ConnectionsDuring a power failure Battery level IconOperation Operating time Intelligent eco mode ControlsBase unit Display/Indicators HandsetBelt clip Someone is using Cell 1/CELL 2 indicators on the base unitCellular line LandlineGetting Started Initial settings Dialing modeDisplay language Voice guidance languageLink to cell feature Registering a cellular phoneTrademarks Handset MenuLink to cell settings Ring as cell modeSelecting which unit receives cellular calls OFFCellular line only mode If you do not use the landline Auto connection to the cellular phoneChanging the Bluetooth PIN Personal Identification Number Cellular line selectionDeregistering Bluetooth devices OFF Changing the PIN for the second timeMaking cellular calls Making landline callsUseful features during a call Answering callsHold Mute Flash for landline callsHandset clarity booster Cell To release hold on the landlinePrivacy mode Call shareWhile another unit is on a cellular call While another unit is on a landline callUsing the other line during a conversation To make a 2nd callTo answer a 2nd call Cell To answer a 2nd callMaking cellular calls Making landline calls Answering callsFor call waiting service users CELL*1 iSELECTTo release hold on the landline Press SP-PHONE Press Hold during a landline call To answer a 2nd call SP-PHONE Shared phonebook Adding entriesGroups Finding and calling a phonebook entry Editing entriesErasing entries Chain dialErasing an entry Erasing all entries in a groupProgrammable settings Programming by scrolling through the display menusMain menu Sub-menu Intercom Bluetooth Link to cell Add new device*2 Talking Caller ID Programming using the direct commands Feature Code SettingFor Bluetooth Link to cell Feature Code Setting For landline Feature Code Setting For Bluetooth Using Bluetooth devices Feature Code Setting For the answering system Feature Code SettingProgramming Alarm Silent modeSpecial programming Changing the handset name Call block Caller ID subscribers onlyRegistering a unit Operating additional unitsRegistering a handset to the base unit Using Caller ID service Caller ID featuresTalking Caller ID Missed callsCaller list Group ringer tone for phonebookViewing the caller list and calling back Caller ID number auto edit feature Editing a caller’s phone number before calling backExample Erasing selected caller information Erasing all caller informationStoring caller information to the phonebook Copying phonebook from a cellular phone phonebook transfer For registered cellular phonesSelect For other cellular phones not registered Cellular phoneOperating a Bluetooth wireless headset using the landline Registering a headsetSwitching between the headset and base unit speakerphone Making landline callsAnswering landline calls Answering system for landline Turning the answering system on/offMemory capacity including your greeting message Call screeningListening to messages using the base unit Greeting messageListening to messages using the handset Erasing all messagesOperating the answering system To listen to new messagesVoice memo Remote operationRemote commands When the English voice guidance is selectedWhen the Spanish voice guidance is selected Voice guidanceAnswering system settings For voice mail service subscribersNumber of rings before the unit answers a call Caller’s recording timeMessage alert Voice mail service for landline Storing the voice mail VM access numberTo erase the voice mail access number Voice mail VM tone detectionTurning VM tone detection on/off The default setting is On Listening to voice mail messagesIntercom Handset locatorTransferring calls, Conference calls Making an intercom callTo complete the transfer Press OFF To establish a conference call Press ConfAnswering a transferred call Handset Wall mounting ChargerHook To stand on a deskError messages Display message Cause/solutionTroubleshooting General use Problem Cause/solutionProblem Cause/solution Programmable settings Problem Cause/solution Battery recharge Problem Cause/solutionMaking/answering calls, intercom Interference Caller ID/Talking Caller ID Problem Cause/solution Talking Caller ID feature is turned off. Turn it Using Bluetooth devices Problem Cause/solution Answering system Problem Cause/solution Bluetooth PIN Problem Cause/solution Liquid damage Problem Cause/solutionIOFF FCC and other information FCC RF Exposure Warning Guía Rápida Española InstalaciónSugerencias de operación Enlace a celular Unidad bese Indicadores Cell 1/CELL Estado Significado Color Operaciones básicas Redial Cómo usar dispositivos Bluetooth Preguntas frecuentes Conectado a la unidad base página Customer services Or, contact us via the web atTTY users hearing or speech impaired users can call Warranty For United States and Puerto Rico Ship-In ServiceOne Panasonic Way, Secaucus, New Jersey Parts Labor One 1 YearLimited Warranty Limits And Exclusions Index Index For your future reference Attach your purchase receipt hereCopyright