Panasonic KX-TCD715NLM operating instructions To enter names selecting characters

TCD715NLM(E)-4Basic2* 01.9.17 8:13 PM Page 31

To enter names selecting characters

The dialing buttons can be used to enter letters and character symbols. The letters are printed on the dialing buttons. Pressing each button selects a character as shown on page 32, 33.

To change the character mode

You can select one of 6 character modes by pressing during entering a name. The factory preset is “ABC”.

1 Press			while entering a name.					<Enter Name>
2 Press		or	until the arrow points
to the desired character mode, then press				.
					H ABC
• The character mode is displayed.
								0—9
								ΑΒΓ
	ABC: Alphabet (Capital/lower*)							: Russian
			0–9: Numeric			: Extended			2 (Capital/lower*)
			ΑΒΓ : Greek		AÄÅ: Extended 1 (Capital/lower*)

*To change from capital to lower case, press . Each time you press , the mode will change.

Chapter 2 Basic Operations

For example, to enter “Anne”:

1.Press 2 .

2.Press , then 6 TWICE.

3.Press , then 6 TWICE.

4.Press 3 TWICE.

A

An

Ann Anne

If you make a mistake while entering a name

Press or to move the cursor to the incorrect character, press C to delete, and enter the correct character. Pressing C erases the character to the left of the cursor. To erase all characters, press and hold C .

31