Panasonic KX-TG6881BX, KX-TG6881UE Liquid damage, Registering a handset to the base unit

Page 49

Useful Information

Problem

The unit does not emit the specified number of rings.

Cause/solution

RIf the first ring is turned off, the number of rings decreases by 1 from the specified number of rings.

Liquid damage

Problem

Liquid or other form of moisture has entered the handset/base unit.

Caution:

Cause/solution

RDisconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorised service centre.

RTo avoid permanent damage, do not use a microwave oven to speed up the drying process.

Registering a handset to the base unit

1Handset:

MN#130

2Base unit:

Proceed with the operation for your model.

n KX-TG6811 series: page 3

Press and hold MN for about 5 seconds. (No registration tone)

n KX-TG6821 series: page 3

Press and hold MN for about 5 seconds, until the registration tone sounds.

R If all registered handsets start ringing, press MN again to stop, then repeat this step. (KX-TG6812/KX-TG6822)

R The next step must be completed within 90 seconds.

3Handset:

MOKN a Wait until “Base PIN” is displayed. a Enter the base unit PIN (default: “0000”). a MOKN

R If you forget your PIN, contact an authorised service centre.

R When the handset has been registered successfully, is displayed.

Note:

RWhile registering, “Base in registering” is displayed on all registered handsets. (KX-TG6812/KX-TG6822)

49

TG68xxBX_UE(en)_0523_ver021.pdf 49

2013/05/23 16:41:17

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Digital Cordless Answering System Digital Cordless PhoneThank you for purchasing a Panasonic product Table of Contents KX-TG6811 series Model compositionModel shown is KX-TG6812.n KX-TG6821 series Series Model No Base unitSupplied accessories Accessory informationFeature differences Accessory item Additional/replacement accessoriesModel number For your safety Battery Important safety instructionsFor best performance Base unit location/avoiding noiseOther information SpecificationsRoutine care Battery installation Setting upConnections Correct IncorrectBattery level Battery chargingIcon Battery level Operation Operating timeHandset ControlsBase unit Navigator keyHandset display items DisplayBase unit display items Power on Turning the power on/offPower off Handset soft key iconsSmart Function Key NR key Initial settingsSetting the Smart Function Key One touch eco modeNormal Answering calls Making callsUseful features during a call Key lock Power back-up operationHandset noise reduction NR key Handset equalizerContinuing a call during a power failure Making calls during a power failureWhen only 1 handset is registered Handset phonebook Copying an entry Copying phonebook entriesCopying all entries Speed dial Display the menu tree and direct command code table Programmable settingsMemo Alarm Once Settings Number of Rings*2Time Adjustment *2, *4 Caller ID New Message Alert *2 Outgoing CallNight Mode Ringer Setup Ringer VolumeOn/Off Night Mode Start/End Night Mode 30 secPower*2 Display Setup LCD & Key Eco Setup Transmission Normal 2 LowLine Setup Dial Mode*2 Pulse Cancel Register*3Ringer Setup*17, *18 Battery CheckRinger Volume Handset Night Mode On/OffSpecial programming AlarmOff Changing the handset name Night modeIncoming call barring Caller ID subscribers only MeN Setting call restrictionStoring an area code to be deleted automatically Storing unwanted callersChanging the base unit PIN Personal Identification Number Setting the repeater modeIncreasing the range of the base unit Dect repeaterCaller ID features Using Caller ID serviceCaller list Viewing the caller list and calling backErasing selected caller information Editing a caller’s phone number before calling backErasing all caller information Storing caller information to the phonebookTurning the answering system on/off Answering systemGreeting message Memory capacity including your greeting messageMeN Using a pre-recorded greeting message Listening to messages using the base unitRecording your greeting message Operating the answering system during playbackErasing all messages Listening to messages using the handsetOperating the answering system Calling back Caller ID subscribers onlyAudible message alert Advanced new message alerting featuresNew message alert by a call Using the answering system remotely Remote access codeRemote commands Remote operationFor voice mail service subscribers Answering system settingsTurning on the answering system remotely Number of rings before the unit answers a callSelecting Greeting Only Caller’s recording timeVoice mail service Handset locator IntercomTransferring calls, conference calls Character entry modes Character entryPersian character table Arabic character tableExtended character table Cause/solution Error messagesDisplay message Problem TroubleshootingGeneral use Battery recharge Programmable settingsMaking/answering calls, intercom Answering system Caller IDRegistering a handset to the base unit Liquid damageDeregistering a handset Index For your future reference

KX-TG6811BX, KX-TG6881UE, KX-TG6822BX, KX-TG6821UE, KX-TG6811UE specifications

Panasonic has long been a trusted name in telecommunications, and its latest range of cordless phones demonstrates an impressive blend of advanced technology and user-friendly features. Among the key models in this lineup are the KX-TG6812BX, KX-TG6812UE, KX-TG6881BX, KX-TG6811UE, and KX-TG6821UE, all designed with a focus on providing clear communication and convenience.

The KX-TG6812BX and KX-TG6812UE are notable for their ergonomic design and intuitive operation. Both models boast a large, backlit LCD display, making it easy to see caller IDs and navigate menus even in low light. With a range of up to 300 meters outdoors and 50 meters indoors, these phones ensure you can move around your home while staying connected. The models feature noise reduction technology, which enhances call clarity by minimizing background interference, a definite plus during conversations.

Moving on to the KX-TG6881BX, this model stands out with added functionality. It supports the use of multiple handsets, allowing users to extend their communication network throughout larger homes. This model also includes a built-in digital answering machine, making it easy to capture and manage messages when you cannot take a call. Its intelligent eco mode reduces power consumption, contributing to energy efficiency while maintaining call quality.

The KX-TG6811UE, while simpler in design, does not compromise on performance. It includes essential features like call blocking, which helps manage unwanted solicitations, and a hands-free speakerphone option for added convenience during group calls or multi-tasking. It offers solid battery life, ensuring that you can rely on it during power outages or extended use.

Lastly, the KX-TG6821UE combines the best elements from the previous models. It features a user-friendly interface, advanced call management options, and a robust battery performance. Its class-leading range and sound quality make it a consistent favorite among users looking for dependable home communication.

In summary, these Panasonic models are equipped with a suite of features designed for modern living, including call clarity technologies, energy-saving modes, and user-friendly interfaces. Their comprehensive functionality, paired with Panasonic's reputation for quality, positions them as excellent choices for reliable home communication needs.
Top Page Image Contents