KX-TC1205RUB / KX-TC1205R UW / KX-TC1205R US / KX-TC1205RUF
10 RF SPECIFICATION
10.1. | Base Unit |
|
|
| |
|
|
|
|
|
|
|
| Item | Value | Refer to | Remarks |
| TX Frequency | 30.175 MHz ± 0.1kHz | ADJUSTMENTS (BASE UNIT) (C) | at CH3 | |
| TX Power | 8mW (3CH) | ADJUSTMENTS (BASE UNIT) (D) | at CH3 | |
| Line Modulation factor | 2.8 kHz~3.4 kHz | ADJUSTMENTS (BASE UNIT) (G) |
| |
| Line Modulation factor (Max.) | 4.5 kHz~8.5 kHz | — |
| |
| Data Modulation factor | 3 kHz~7 kHz | — |
| |
| Line Output level | 80mV ± 20mV | — |
| |
| *: Refer to Adjustment (P.24). |
|
|
| |
10.2. | Handset |
|
|
| |
|
|
|
|
|
|
|
| Item | Value | Refer to | Remarks |
| TX Frequency | 39.875 MHz ± 0.1kHz | ADJUSTMENTS (HANDSET) (D) | at CH3 | |
| TX Power | 4mW (3CH) | ADJUSTMENTS (HANDSET) (E) | at CH3 (Antenna | |
|
|
|
|
| soldering point 50Ω |
|
|
|
|
| Load) |
| Data Modulation factor | 4.0 kHz/dev~8.0 kHz/dev | ADJUSTMENTS (HANDSET) (J) | at CH3 | |
| MIC Modulation factor | 1.5 kHz/dev~0.3 kHz/dev | ADJUSTMENTS (HANDSET) (I) | at CH3 (MIC terminal | |
|
|
|
|
| 2.4mV Input) |
| SP Output level | 120mV ± 30mV | — |
| |
**: Refer to Adjustment (P.27).
11 HOW TO CHECK THE HANDSET SPEAKER
1.Prepare the digital voltmeter, and set the selector knob to ohm meter.
2.Put the probes at the speaker terminals as shown below.
30