Panasonic KX-TCD715ALM Setting the Time Alarm, To turn off the time alarm, To stop the time alarm

Page 50

Setting the Time Alarm

The handset will sound an alarm at a preset time for 30 seconds just for once or repeated daily. You can also select the ringer type for time alarm (p. 52). If you select the melody for time alarm, the handset will sound longer (It depends on the ringer type). You must set the date and time before setting the alarm time.

Make sure that the power is ON (p. 13) and the unit is in the standby mode.

1Press .

2Press or until the arrow points to “Setting Handset”, then press .

3Press or until the arrow points

to “Time Alarm”, then press .

4Press or until the arrow points to “Set Alarm Time”, then press

.

•The current setting is displayed on the 2nd line.

<Enter Time> _:__

5Enter the desired time (hour and munite)

using a 4-digit number (24-hour time),

then press .

Ex: To set 06:30, enter “0630”.

<Enter Time> 06:30

6While “Save” is at the arrow, press .

7Press or to select “Once” or “Repeat Daily”.

8Press .

•A beep sounds.

•To return to the standby mode, press .

To turn off the time alarm

1Follow the steps 1 to 3.

2Press or until the arrow points

to “Alarm ON/OFF”, then press .

3Press or to select OFF, then

press .

•A beep sounds.

•To return to the standby mode, press

.

To stop the time alarm

When the alarm sounds and “Time Alarm” is shown on the flashing backlit display,

press any dialling button 0 to 9 , ,

, or .

•If “Once” is selected, the setting is automatically turned off. If “Repeat Daily” is selected, the setting remains and the alarm

will repeatedly sound at the setting time.

•If the unit is in the talk, speakerphone or intercom mode during the alarm time, the alarm will not sound. After finishing a conversation, the alarm will start ringing.

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Operating Instructions Charge the batteries for about 15 hours before initial useInstallation Important InformationService difficulties Ringer Equivalence Number RENCord p One Two Belt Clip p Wall Mounting p Before Initial UseAC Adaptor p Telephone Line Batteries p Model No DescriptionBase Unit Location Battery ChargeFor Best Performance Operating rangeContents Multi-Unit User Operations Location of Controls Base unitHandset Characters DisplayIcons Display backlightSettings To Mains Outlet AC 230- 240 V, 50/60 Hz AC AdaptorYou can check the present battery strength on the display Settings Installing the Batteries in the HandsetBattery strength RechargeTo turn the power OFF, press and hold until a beep sounds Turning the Power onBattery information OperationTo set the handset programming p Summary of Programmable FunctionsPress PressPreparation Summary of Programmable Functions Handset settingsStandby mode Function menuTo set the auto talk feature p To set the alarm time pTo select the talk mode display p To select the battery type pSelecting the Display Language Programmable SettingsSelecting the Auto Talk Feature If already set, the current setting is displayed Setting the Date and TimeInput Command is displayed Beep sounds To return to the standby mode, pressPress or to select Setting Base then Volume level Programmable Settings Selecting the Handset Ringer VolumeSelecting the Base Unit Ringer Volume Making Calls With the HandsetPress or Making CallsTo redial the last number dialled To store an entered number in the phonebook To redial the last number dialled on the base unit To adjust the speaker volume 8 levelsMaking Calls With the Base Unit Digital Speakerphone To mute your conversationWith the Base Unit Answering CallsWith the Handset Private category feature Caller ID ServiceHow caller information is displayed when a call is received Checking the number of new callsTo exit the list, press Using the Caller ListViewing the Caller List What meansDisplayed phone number is dialled automatically Using the Caller List Calling Back from the Caller ListEditing the Caller’s Phone Number To call back, press or To store the number in the phonebookWhile Save Phonebook is at Arrow, press Press to return to the standby modeStoring the Caller List Information in the Phonebook Enter the name, up to 16 characters p PressTo clear all entries in the Caller List Using the Caller List Clearing the Caller ListTo clear a specific entry from the Caller List Press or to select YES, thenUsing the Phonebook Press and hold C Using the PhonebookStoring Names and Numbers in the Phonebook Press While Save is at the arrowPress While entering a name To change the character modeIf you make a mistake while entering a name Press Until the arrow pointsCharacter mode table Greek AÄÅ ExtendedŠ Extended Russian Y Ý Z Ź Ż ŽPress or to select the backlight color Using the Phonebook Using the Private Category FeatureCategory, then press Press Beep soundsTo search for a name by initial Finding Items in the PhonebookDialling from the Phonebook Press or until the desired name is displayedUsing the Phonebook Editing an Item in the Phonebook Clearing an Item from the PhonebookStored number is displayed Hot Key DialClearing an item in the hot key dial To copy all the items in the phonebook Using the Phonebook Phonebook CopyTo copy the specified item in the phonebook Base unit Press IntercomHandset Press I N T , then During the intercomFrom the base unit to the handset Intercom Transferring a Call Using the IntercomFrom the handset to the base unit Ex. Line access number 9 PBX Special FeaturesHow to Use the Pause Feature To select 5 seconds, press To select 3 seconds, press PressCancelled Special Features Setting the Key LockUsing the Recall Feature To cancel the key lockCall Waiting and Caller ID Compatible Selecting the Flash modeFactory preset is Press 2 thenDialling the Stored Number Setting the Direct Call Number and ModeDirect Call Call Prohibition To turn OFF the call prohibition modeTo Setting Handset, then press Enter the 4-digit handset PIN pPress Enter the 4-digit base unit PIN p To Setting Base, then pressCall Restriction Enter a call restriction number, up to 8 digitsTo cancel the call restricted handsets To cancel the call restriction numbersTo stop the time alarm Setting the Time AlarmTo turn off the time alarm Follows Other Programmable SettingsSelecting the Talk Mode Display Press Until the arrow pointsOther Programmable Settings Setting the Handset Ringer Type External ringer type pSetting the Battery Low Alarm Setting the Call Waiting ToneSetting the Range Warning Alarm Press To select Setting Handset thenSetting the Key Tones Selecting the Display Backlight ColorOn the handset Setting the PINBeep sounds Display will return to Setting On the base unitOn the handset Clearing the Settings in MemoryFunction Initial setting FunctionBell selection All handsets Setting Base, then pressFunction Call restriction All clear Numbers Base unit PIN 0000Operating More than One Base Unit For Optional Multi-Unit UsersOperating More than One Handset Handset Press Base unit where handset is to be RegisteredRegistering Handsets in the Base Unit Handset automatically selects a registered base unit Automatic base unit access AutoSpecified base unit access Press or to select the desired base unitCancel Base, then press Cancelling a HandsetCancelling a base unit Press Displayed Beep soundsBell Selection To Setting Base, then pressFor Optional Multi-Unit Users Selecting specified handsetsFollow steps 1 to 4 on Press Selecting first handsetSelecting all handsets Enter the handset number you want to ringPress While Standby Display is at Arrow, press OFF PressPaging all the handsets from the base unit All paging Paging/IntercomIntercom between the Handsets and the Base Unit Paging a handset from the base unit Individual pagingIntercom between the Handsets Transferring a call without the intercom Transferring a call using the intercomTransferring a Call from One Handset to Another Paging/Intercom Conference To adjust the headset receiver volume HIGH, Medium or LOW Using a Belt ClipUsing an optional Headset While using the headset, press orReplacing the Batteries Press or to select Ni-Cd or Ni-MH, then pressUseful Information Chapter Wall Template To charge the handset batteryWall Mounting Connect the AC adaptorOption Covers Tab TabProblem Remedy Before Requesting HelpLevel p Handset does not ring Turn the power on pUse indicator Light goes out You cannot redial Base unit does not ringBefore Requesting Help Safety Instructions Term Definitions DectAdding Another Phone Telephone Line Cord Standard TelephoneN52

KX-TCD715ALM specifications

The Panasonic KX-TCD715ALM is a sophisticated cordless phone designed to meet the communication needs of today’s households. This model combines advanced features with sleek aesthetics, making it not just functional but also stylish.

One of the standout features of the KX-TCD715ALM is its sophisticated digital answering system. The built-in answering machine can record up to 18 minutes of messages, ensuring that you never miss important calls. This feature includes a remote access option, allowing users to retrieve their messages from anywhere, which adds a layer of convenience for busy individuals or those who travel frequently.

The phone showcases DECT (Digital Enhanced Cordless Telecommunications) technology, which offers crystal-clear sound quality and minimizes interference. DECT technology ensures secure communication and allows multiple handsets to operate simultaneously without disruptions. This is particularly beneficial for larger households where multiple users may need to communicate at once.

Another significant characteristic is the phone’s impressive range. With a maximum operating range of up to 300 meters outdoors and 50 meters indoors, users can move freely around their homes while staying connected. This is particularly advantageous in larger properties where connectivity can often be an issue.

The KX-TCD715ALM also features a 1.8-inch backlit display, making it easy to read caller IDs and navigate through the phone’s functionalities even in low light conditions. The intuitive menu interface allows for straightforward access to various features, including phonebook storage for up to 50 names and numbers, enhancing user experience and efficiency.

In terms of battery life, the phone is equipped with a long-lasting rechargeable battery, providing ample talk time and standby time. Additionally, the eco-friendly mode minimizes power consumption, which is an added advantage for environmentally conscious users.

Moreover, the phone emphasizes user-friendliness, featuring one-touch dial buttons and a headset jack for hands-free conversations. The KX-TCD715ALM is compatible with hearing aids, making it accessible for individuals with hearing impairments.

In summary, the Panasonic KX-TCD715ALM combines functionality with advanced technologies that enhance communication. Its digital answering system, DECT technology, long range, and user-friendly features make it a suitable choice for families and individuals looking for a reliable cordless phone. With its blend of style and performance, the KX-TCD715ALM is an excellent addition to any modern home.
Top Page Image Contents