Panasonic KX-T2375ALW To store in a Lower memory location, If the phone number is in an Upper

Page 19

Ò

To store in a LOWER memory location

1 Press (PROGRAM).

2	Enter a phone number, up to 22 digits.
2	³If you enter a wrong number, press
	(PROGRAM) and start again from step 1.

3 Press (AUTO/LOWER).

4 Press one of the one-touch auto dial buttons.

³A long beep sounds.

³The unit will return to the standby mode.

³If 3 beeps sound, the number entered in step 2 may be over 22 digits. Lift the handset and place it on the cradle to return to the standby mode, and start again from step 1.

³If a pause is required for dialling, press (PAUSE) where needed. Pressing (PAUSE) counts as one digit (p. 21).

To erase a stored number

1 Press (PROGRAM).

2	If the phone number is in an UPPER
	memory location, press the one-touch

auto dial button for the phone number to be erased.

OR

If the phone number is in a LOWER memory location, press (AUTO/LOWER), then press the one-touch auto dial button for the phone number to be erased.

³A long beep sounds.

³The unit will return to the standby mode.

³When using the Dial Lock (p. 25) or Call Restriction feature (p. 26), you cannot erase a phone number in the EMERGENCY button.

Advanced Operation

19

Image 19

Contents Model No. KX-T2375ALW Serial No Date of purchase Accessories includedBefore Initial Use For your future referenceContents Headset Jack p Display p Ringer Selector p VolumeLocation of Controls DIAL\LOCK Button pDisplay Installing the Batteries SettingsAfter connection, lift the handset to check for a dial tone Connecting the Handset/Telephone Line CordConnecting a Communication Device Press Mute Press Program to store the settingProgramming Summary of Preparations Make sure that a call is not put on holdYou can select AM/PM or 24-hour clock by programming Time AdjustmentPress 1 to Setting the LCD ContrastSelecting the Ringer Volume PressWall Template Wall MountingLocks, so the tab holds the handset To redial the last number dialled Using the speakerphoneUsing the speakerphone Press SP-PHONE/HEADSETÛ Making CallsPress Hold To increase, press Volume . To decrease, press VolumeTo put a call on hold To release the holdTalk into the MIC microphone Answering CallsPress a memory station number 0 to Speed DiallerStoring Phone Numbers in Memory Enter a phone number, up to 22 digitsTo erase a stored number Dialling a Stored NumberTo store in an Upper memory location One-Touch DiallerPress one of the one-touch auto dial buttons If the phone number is in an Upper To store in a Lower memory locationMemory location, press the one-touch Lift the handset or press SP-PHONE/HEADSET From an Upper memory locationFrom a Lower memory location Memory cardMuting Your Conversation Special FeaturesHow to Use the Pause Button For Analog PBX Line/Long Distance Service UsersTo turn OFF, press To turn ON, press Turning Music Played During the HoldSelecting the recall time Recall ButtonPress a dialling button 1 to Number Setting the PIN CodeEnter a new PIN code using a 4-digit Press Mute Enter the current PIN code. Ex is enteredEnter the PIN code p To cancel the dial lockDial Lock To set the dial lockTo set the call restriction Call RestrictionEnter the PIN code p . Ex. Your PIN code is To cancel the call restriction Using the Optional HeadsetConnecting the Optional Headset to the Unit Making/Answering Calls Make sure to install the batteriesTo adjust the headset receiver volume 4 levels While using the headset, press Volume orBattery Precautions Battery ReplacementBefore Requesting Help ProblemRemedyProblem Remedy Installations Environment Safety InstructionsUseful Information Instructions to customer Important InformationService difficulties PQQX13367ZA-BM F0102-0D