Panasonic KX-T2375ALW operating instructions Display

Page 5

Display

(This display shows all of the possible conﬁgurations.)

: In the standby mode, the display shows the current time. (Ex. 12:00AM)

: During a conversation, the call duration is displayed. (Ex. 2 hours, 14 minutes, 30 seconds)

: (RECALL) was pressed.

: (PAUSE) was pressed while storing phone numbers.

: ($) was pressed while dialling.

: (#) was pressed while dialling.

: (AUTO/LOWER) was pressed (p. 16, 19).

: (MUTE) was pressed during a conversation (p. 21).

: The unit plays music during the hold for a caller.

: The unit is in the clock setting mode.

: The unit is in the programming mode (p. 9).

: The dial lock mode is set. To cancel the mode, see page 25.

: This display ﬂashes, when the battery power is low. To replace the batteries, see page 29.

Preparation

5

Image 5

Contents Model No. KX-T2375ALW Before Initial Use Accessories includedFor your future reference Serial No Date of purchaseContents Location of Controls VolumeDIAL\LOCK Button p Headset Jack p Display p Ringer Selector pDisplay Installing the Batteries SettingsAfter connection, lift the handset to check for a dial tone Connecting the Handset/Telephone Line CordConnecting a Communication Device Programming Summary of Preparations Press Program to store the settingMake sure that a call is not put on hold Press MuteYou can select AM/PM or 24-hour clock by programming Time AdjustmentSelecting the Ringer Volume Setting the LCD ContrastPress Press 1 toLocks, so the tab holds the handset Wall MountingWall Template Using the speakerphone Press SP-PHONE/HEADSETÛ Using the speakerphoneMaking Calls To redial the last number dialledTo put a call on hold To increase, press Volume . To decrease, press VolumeTo release the hold Press HoldTalk into the MIC microphone Answering CallsStoring Phone Numbers in Memory Speed DiallerEnter a phone number, up to 22 digits Press a memory station number 0 toTo erase a stored number Dialling a Stored NumberPress one of the one-touch auto dial buttons One-Touch DiallerTo store in an Upper memory location Memory location, press the one-touch To store in a Lower memory locationIf the phone number is in an Upper From a Lower memory location From an Upper memory locationMemory card Lift the handset or press SP-PHONE/HEADSETHow to Use the Pause Button Special FeaturesFor Analog PBX Line/Long Distance Service Users Muting Your ConversationTo turn OFF, press To turn ON, press Turning Music Played During the HoldPress a dialling button 1 to Recall ButtonSelecting the recall time Enter a new PIN code using a 4-digit Setting the PIN CodePress Mute Enter the current PIN code. Ex is entered NumberDial Lock To cancel the dial lockTo set the dial lock Enter the PIN code pEnter the PIN code p . Ex. Your PIN code is Call RestrictionTo set the call restriction Connecting the Optional Headset to the Unit Using the Optional HeadsetTo cancel the call restriction To adjust the headset receiver volume 4 levels Make sure to install the batteriesWhile using the headset, press Volume or Making/Answering CallsBattery Precautions Battery ReplacementBefore Requesting Help ProblemRemedyProblem Remedy Installations Environment Safety InstructionsUseful Information Instructions to customer Important InformationService difficulties PQQX13367ZA-BM F0102-0D