Panasonic KX-T2375ALW operating instructions Service difficulties

Page 35

If you are satisﬁed with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed.

You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telephone which is not connected by means of a modern plug and socket. In such cases a new socket will need to be installed.

Should the Permitted Attachment not operate when plugged into a socket, it is either faulty or unsuitable for operation with your telephone service. It should be returned to the store where purchased or an Authorised Service Centre.

Service difficulties

If at any time a fault occurs on your telephone service carry out the following checks before you call for service:

³Disconnect the Permitted Attachment and try using the service with the normal telephone.

³If the telephone service then operates satisfactorily, the fault is in your Permitted Attachment. Leave the Permitted Attachment disconnected and report the fault to its supplier or agent to arrange for repair.

³If when using the telephone the service is still faulty, report the fault to “Service Difficulties and Faults” for attention.

You are required to keep this Permitted Attachment in good working order while it is connected to your telephone service. Its construction or internal circuit must not be modiﬁed in any way without permission.

Useful Information

35

Image 35

Contents Model No. KX-T2375ALW Serial No Date of purchase Accessories includedBefore Initial Use For your future referenceContents Headset Jack p Display p Ringer Selector p VolumeLocation of Controls DIAL\LOCK Button pDisplay Installing the Batteries SettingsAfter connection, lift the handset to check for a dial tone Connecting the Handset/Telephone Line CordConnecting a Communication Device Press Mute Press Program to store the settingProgramming Summary of Preparations Make sure that a call is not put on holdYou can select AM/PM or 24-hour clock by programming Time AdjustmentPress 1 to Setting the LCD ContrastSelecting the Ringer Volume PressLocks, so the tab holds the handset Wall MountingWall Template To redial the last number dialled Using the speakerphoneUsing the speakerphone Press SP-PHONE/HEADSETÛ Making CallsPress Hold To increase, press Volume . To decrease, press VolumeTo put a call on hold To release the holdTalk into the MIC microphone Answering CallsPress a memory station number 0 to Speed DiallerStoring Phone Numbers in Memory Enter a phone number, up to 22 digitsTo erase a stored number Dialling a Stored NumberPress one of the one-touch auto dial buttons One-Touch DiallerTo store in an Upper memory location Memory location, press the one-touch To store in a Lower memory locationIf the phone number is in an Upper Lift the handset or press SP-PHONE/HEADSET From an Upper memory locationFrom a Lower memory location Memory cardMuting Your Conversation Special FeaturesHow to Use the Pause Button For Analog PBX Line/Long Distance Service UsersTo turn OFF, press To turn ON, press Turning Music Played During the HoldPress a dialling button 1 to Recall ButtonSelecting the recall time Number Setting the PIN CodeEnter a new PIN code using a 4-digit Press Mute Enter the current PIN code. Ex is enteredEnter the PIN code p To cancel the dial lockDial Lock To set the dial lockEnter the PIN code p . Ex. Your PIN code is Call RestrictionTo set the call restriction Connecting the Optional Headset to the Unit Using the Optional HeadsetTo cancel the call restriction Making/Answering Calls Make sure to install the batteriesTo adjust the headset receiver volume 4 levels While using the headset, press Volume orBattery Precautions Battery ReplacementBefore Requesting Help ProblemRemedyProblem Remedy Installations Environment Safety InstructionsUseful Information Instructions to customer Important InformationService difficulties PQQX13367ZA-BM F0102-0D