Panasonic KX-T2375ALW operating instructions Before Requesting Help, ProblemRemedy

Page 30

Before Requesting Help

ProblemRemedy

The unit does not work.

³Check the settings (p. 6–12).

³Remove the batteries and reinstall them to reset the unit.

³KX-T2375ALW is not designed to be used with rotary (pulse dialling) service.

The unit does not ring.

³The RINGER selector is set to OFF. Set to HIGH or LOW (p. 11).

You cannot dial.³Dial lock mode is set. To cancel the mode, see page 25.

³The dialled number is restricted. To cancel, see page 27.

The other party suddenly

³(MUTE) may have been pressed during

cannot hear your voice

the conversation. If “

” is displayed,

during a conversation.

press (MUTE).

 

You cannot program items ³Programming is not possible when a

such as the dialling mode. call is put on hold.

³Do not pause for over 60 seconds while programming.

You cannot store a phone number in memory.

³Programming is not possible when a call is put on hold.

³Check that the batteries are installed in the unit and that the battery power is not low.

³Do not enter a phone number more than 22 digits long.

³When using the Dial Lock (p. 25) or Call Restriction feature (p. 26), you cannot store a phone number in the EMERGENCY button.

While programming, the unit starts to ring and stops the program.

³To answer the call, lift the handset or press (SP-PHONE/HEADSET). Start again from the beginning after hanging up.

30

Image 30
Contents Model No. KX-T2375ALW For your future reference Accessories includedBefore Initial Use Serial No Date of purchaseContents DIAL\LOCK Button p VolumeLocation of Controls Headset Jack p Display p Ringer Selector pDisplay Settings Installing the BatteriesConnecting the Handset/Telephone Line Cord After connection, lift the handset to check for a dial toneConnecting a Communication Device Make sure that a call is not put on hold Press Program to store the settingProgramming Summary of Preparations Press MuteTime Adjustment You can select AM/PM or 24-hour clock by programmingPress Setting the LCD ContrastSelecting the Ringer Volume Press 1 toWall Mounting Wall TemplateLocks, so the tab holds the handset Making Calls Using the speakerphoneUsing the speakerphone Press SP-PHONE/HEADSETÛ To redial the last number dialledTo release the hold To increase, press Volume . To decrease, press VolumeTo put a call on hold Press HoldAnswering Calls Talk into the MIC microphoneEnter a phone number, up to 22 digits Speed DiallerStoring Phone Numbers in Memory Press a memory station number 0 toDialling a Stored Number To erase a stored numberOne-Touch Dialler To store in an Upper memory locationPress one of the one-touch auto dial buttons To store in a Lower memory location If the phone number is in an UpperMemory location, press the one-touch Memory card From an Upper memory locationFrom a Lower memory location Lift the handset or press SP-PHONE/HEADSETFor Analog PBX Line/Long Distance Service Users Special FeaturesHow to Use the Pause Button Muting Your ConversationTurning Music Played During the Hold To turn OFF, press To turn ON, pressRecall Button Selecting the recall timePress a dialling button 1 to Press Mute Enter the current PIN code. Ex is entered Setting the PIN CodeEnter a new PIN code using a 4-digit NumberTo set the dial lock To cancel the dial lockDial Lock Enter the PIN code pCall Restriction To set the call restrictionEnter the PIN code p . Ex. Your PIN code is Using the Optional Headset To cancel the call restrictionConnecting the Optional Headset to the Unit While using the headset, press Volume or Make sure to install the batteriesTo adjust the headset receiver volume 4 levels Making/Answering CallsBattery Replacement Battery PrecautionsProblemRemedy Before Requesting HelpProblem Remedy Safety Instructions Installations EnvironmentUseful Information Important Information Instructions to customerService difficulties PQQX13367ZA-BM F0102-0D